[chirp_users] Support for CS800D??

Larry Howell larry.howell.47 at gmail.com
Tue Dec 25 20:33:56 PST 2018


Will,

Chirp can only program analog radios.  The CS800D is DMR so you need a code
plug,  which is a fairly complex configuration file.  I'd suggest searching
online for "cs800d ciodeplug" to locate one and learn more about DMR.  I
found one for my AT-868UV HT here and one for the CS800D code plug can be
found at http://arrl-ohio.org/digital/kb8lkh.html and other sites.

Larry AC8YE

On Tue, Dec 25, 2018 at 10:23 PM William Liporace <wc2l at wc2l.com> wrote:

> Hi Folks,
> I have not looked too much online, but it does not appear that anyone has
> setup the Chirp to work with the Connect System radios. I happen to have
> picked up the CS800D. Please correct me if I am wrong...
>
> TNX Will WC2L
>
> --
> William Liporace WC2Lhttp://www.wc2l.com or http://dxc.wc2l.com
> AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHzwc2l at wc2l.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to larry.howell.47 at gmail.com at
> larry.howell.47 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181225/cd115033/attachment-0002.html 


More information about the chirp_users mailing list