[chirp_users] Baofeng BF-F8+ Compatibility

[Amnon Zohar]

Sometimes cutting off some plastic helps a better contact

בתאריך יום א׳, 26 באוג' 2018, 15:05, מאת Jim Unroe ‏<rock.unroe at gmail.com>:

> On Sun, Aug 26, 2018 at 2:49 AM, E M Recio via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
> > Yeah, so what is the deal then? Same cable, same machine, same chirp? Am
> I
> > selecting the wrong menu item for radio?
> >
>
> Hi E M,
>
> Unfortunately you haven't mentioned what the error message is so the
> best thing I can do is guess. A common problem of these radios is poor
> positioning of the socket in the case. Most likely, this is causing
> the 2-pin plug of known working programming cable to not fully engage
> in the socket of the radio. A common workaround is to put some
> pressure on the 2-pin plug in an effort to get it to become fully
> engaged during the cloning process.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180826/7c5c6108/attachment.html