[chirp_users] uv-82 settings does not show up using latest build

[aj4ck1]

Is there anyway that I can do this, like remove the battery for 24 hrs. The "geek" in me wants to know

-------- Original message --------
From: Jim Unroe <rock.unroe at gmail.com> 
Date: 4/27/18  10:05  (GMT-06:00) 
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Subject: Re: [chirp_users] uv-82 settings does not show up using latest build 

Hi Joe,

On Fri, Apr 27, 2018 at 10:48 AM, Joe Creel <aj4ck1 at gmail.com> wrote:
> I am seeing this when I run the latest daily build in Lixux 16.04 LTS, from
> windows 7 also. Attached is the STDERR output.

Your radio has a squelch threshold setting that is out-of-range.
Unfortunately a RESET is neither a "reset" or a "factory" reset.

Email your downloaded image to me and I will email it back with a
value that is in range.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to aj4ck1 at gmail.com at aj4ck1 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180427/6a3e68a1/attachment.html