[chirp_users] programming issues

Jim Unroe rock.unroe at gmail.com
Wed Sep 20 02:30:43 PDT 2017


On Tue, Sep 19, 2017 at 11:04 PM, Glenn Wise <ruerue at windstream.net> wrote:
>
>
>
>
> 9-19-2017
>
>
>
> I am using Chirp and a TYT USB cable to program a TYT-9000D 2 meter ham
> radio.
>
> Software and USB cable work without any issues.
>
>
>
> I have tried MULTIPLE times to use same version of CHIRP and same USB cable
> to program a QTY-7900D and a QTY-8900D.
>
> I have NOT ever been able to read the QYT radio’s.  Neither model.
>
> The software will appear to start to read the radio and then drop out.
>
> Screen shows either comm. Error or says radio would not go into clone mode.
>
>
>
> By the software and cable working on the TYT-9000D, in my mind that clears
> the software and cable.
>
> IF there were any issues with the software or the cable, I don’t believe I
> could use the combo on the TYT-9000D.
>
> I am open to any suggestions as what to do. HELP
>
>
>
> Glenn Wb4zjb

Glenn,

The QYT radios require a different programming cable. The TYT uses
only the ring (TXD/RXD) and sleeve (GND) connections where the QYT
radios use the tip (TXD), ring (RXD) and sleeve (GND) connections.

Jim KC9HI



More information about the chirp_users mailing list