[chirp_users] RE; Connecting to my radio

[Rick Begeman]

Following the recommendation
rick at rick-GC667AA-ABA-SR5130NX / $ sudo addgroup rick dialup
addgroup: The group `dialup' does not exist.


      
      -        
      -       
   
      -       

      -       

      - Rick Begeman    
      -       

      - Today at 6:40 AM

    
   - To
      -        
      -   Jim Unroe  
 
      -     

     
Message body
 Thanks Jim

I'm embarrassed I did not find that. I was going at it from the other direction trying to identify which ttyS is assigned to the physical port I am connecting to.

I came up with many answers that gave hardware addresses (bus and device id's) but not which ttyS* that chirp is using to connect.

    From: Jim Unroe 
 To: Rick Begeman ; Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
 Sent: Thursday, September 28, 2017 2:16 AM
 Subject: Re: [chirp_users] Connecting to my radio
  
On Wed, Sep 27, 2017 at 11:39 PM, Rick Begeman via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
>

See "serial port permissions" on the "Running CHIRP Under Linux" page.

http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170928/2d122e4d/attachment.html