[chirp_users] CHIRP DOWNLOAD problems

SCOTT PETERSON SPETE2 at VERIZON.NET
Fri Oct 27 17:46:13 PDT 2017


Ok I found the hang-up, the plug into the Radio was not completely seated. Downloaded the Radio Image and saved it to a work file. That done I opened the repeater local listing selecting 220 MHz and populated the Radio image list 1-44, then went to 440 MHz attempting to populate list 45 plus. Didn’t work instead it overwrote the 1-44 list. HELP!!!

 

Scott

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Friday, October 27, 2017 4:44 PM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] CHIRP DOWNLOAD problems

 

 

>This is what I found using Device Manager



 

 

OK. The good news is you don't have a Prolific type chip. It is instead is a WCH CH340 chip. The driver auto-installed by Windows should be fine.

 

The port assigned to the programming cable is COM3 so that is what you should choose.

 

Jim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171027/95ecdd41/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 16387 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171027/95ecdd41/attachment-0002.png 


More information about the chirp_users mailing list