[chirp_users] Connecting to my FT2DR

rick bitbungler at yahoo.com
Mon Oct 16 12:55:08 PDT 2017


OK I found some more clues.

I plugged in a Prolific USB to RS232 adapter.

BINGO!


rick at rick-ham ~ $ lsusb
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 
Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0c45:7412 Microdia
Bus 002 Device 011: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial 
Port
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rick at rick-ham ~ $ ls /dev/tty***
/dev/tty    /dev/tty21  /dev/tty35  /dev/tty49  /dev/tty62 /dev/ttyS17  
/dev/ttyS30
/dev/tty0   /dev/tty22  /dev/tty36  /dev/tty5   /dev/tty63 /dev/ttyS18  
/dev/ttyS31
/dev/tty1   /dev/tty23  /dev/tty37  /dev/tty50  /dev/tty7 /dev/ttyS19  
/dev/ttyS4
/dev/tty10  /dev/tty24  /dev/tty38  /dev/tty51  /dev/tty8 /dev/ttyS2   
/dev/ttyS5
/dev/tty11  /dev/tty25  /dev/tty39  /dev/tty52  /dev/tty9 /dev/ttyS20  
/dev/ttyS6
/dev/tty12  /dev/tty26  /dev/tty4   /dev/tty53  /dev/ttyprintk 
/dev/ttyS21  /dev/ttyS7
/dev/tty13  /dev/tty27  /dev/tty40  /dev/tty54  /dev/ttyS0 /dev/ttyS22  
/dev/ttyS8
/dev/tty14  /dev/tty28  /dev/tty41  /dev/tty55  /dev/ttyS1 /dev/ttyS23  
/dev/ttyS9
/dev/tty15  /dev/tty29  /dev/tty42  /dev/tty56  /dev/ttyS10 /dev/ttyS24  
/dev/ttyUSB0
/dev/tty16  /dev/tty3   /dev/tty43  /dev/tty57  /dev/ttyS11 /dev/ttyS25
/dev/tty17  /dev/tty30  /dev/tty44  /dev/tty58  /dev/ttyS12 /dev/ttyS26
/dev/tty18  /dev/tty31  /dev/tty45  /dev/tty59  /dev/ttyS13 /dev/ttyS27
/dev/tty19  /dev/tty32  /dev/tty46  /dev/tty6   /dev/ttyS14 /dev/ttyS28
/dev/tty2   /dev/tty33  /dev/tty47  /dev/tty60  /dev/ttyS15 /dev/ttyS29
/dev/tty20  /dev/tty34  /dev/tty48  /dev/tty61  /dev/ttyS16 /dev/ttyS3
rick at rick-ham ~ $


What cord are you using to connect your Yaesu FT2DR?

I have been trying to use the cord that came with the radio.

I have even tried connecting the radio and turning it on to clone mode 
to see if a tty port is created, no joy...

It would appear that the cable provided with my radio is not a "smart" 
cable and even connecting to the radio does not create a port.

Who tested the FT2DR? And what cord did they use?

Rick




More information about the chirp_users mailing list