[chirp_users] Connecting to my FT2DR

rick bitbungler at yahoo.com
Mon Oct 16 12:30:42 PDT 2017


On 15/10/17 20:00,chirp_users-request at intrepid.danplanet.com  wrote:

> On Sat, Oct 14, 2017 at 3:50 PM, rick via chirp_users
> <chirp_users at intrepid.danplanet.com>  wrote:
>> Running Linux Mint 18.2
>>
>> Loaded newest release version of Chirp-daily (CHIRP daily-20171013)
>>
>> When I try to download from radio, this error message is displayed before I
>> can press send on the radio
>>
>> X An error has occurred
>> Could not configure port: (5, 'input/output error')
>>
>> Attached png is screengrab
>>
>> I did some further digging and tried the first 10 "ttyS*" with the same
>> results.
>>
>> lsusb command provides bus and device numbers but not which ttyS* is in use.
>>
>> Any Help?
>>
> I also run Linux Mint here. If you are using a USB based programming
> cable you must scroll all the way down to the bottom of the list and
> choose: /dev/ttyUSB0
>
> Jim
>
Also make sure you are a member of the 'dialout' group (that is not the
default case, sadly) else no serial port's (of whatever type) will be
available to you.

Open a terminal window, (and make it wide so lines don't wrap, making it
much easier to see what's going on.)

Then...

dave-XPS-L502X ~ $*groups*
dave adm/dialout/  cdrom sudo dip plugdev lpadmin sambashare wireshark

(Everything BEFORE and including the '$' is the system prompt on the
first line.? Your machine will be different.
The command 'groups' was the entered command.?? The line under that is
the system response)

If 'dialout' does not appear in that list.?? Then do this...
(Substitute <name> for/your/  login username,? sudo will ask for your
login password.)

dave-XPS-L502X ~ $*sudo adduser <name> dialout*

You'll see a reply saying if you've been added to the dialout group, or
are already a member.

/*If */you were just added to that group, then, log out and log back in
again (no need to reboot) and you'll now have access to the serial ports.

An easy way to find out what port something is assigned to, is (again,
in a terminal window)

dave-XPS-L502X ~ $ *ls /dev/ttyU**
/dev/ttyUSB0

This will list all attached and configured USB based serial ports.

If you have multiple USB serial devices, then do that before and after
connecting a new device, to find out what "device ID" the new device is
assigned to.

Hope something here helps.

73.

Dave B

Results;

rick at rick-ham ~ $ groups
rick adm dialout cdrom sudo dip plugdev lpadmin sambashare
rick at rick-ham ~ $ ls /dev/ttyU**
ls: cannot access '/dev/ttyU**': No such file or directory  << with 
Yaesu cord plugged in
rick at rick-ham ~ $ ls /dev/ttyU**
ls: cannot access '/dev/ttyU**': No such file or directory << with RT 
systems cord plugged in
rick at rick-ham ~ $ lsusb
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 
Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0c45:7412 Microdia
Bus 002 Device 010: ID 2100:9068 RT Systems
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rick at rick-ham ~ $ ls /dev
autofs           i2c-4               rfkill    tty11  tty39 tty9       ttyS6
block            initctl             rtc       tty12  tty4 ttyprintk  ttyS7
bsg              input               rtc0      tty13  tty40 ttyS0      ttyS8
btrfs-control    kmsg                sda       tty14  tty41 ttyS1      ttyS9
bus              lightnvm            sdb       tty15  tty42 ttyS10     uhid
cdrom            log                 sdc       tty16  tty43 ttyS11     
uinput
cdrw             loop0               sdd       tty17  tty44 ttyS12     
urandom
char             loop1               sde       tty18  tty45 ttyS13     usb
console          loop2               sdf       tty19  tty46 ttyS14     
userio
core             loop3               sdf1      tty2   tty47 ttyS15     vcs
cpu_dma_latency  loop4               sdf2      tty20  tty48 ttyS16     vcs1
cuse             loop5               sdf5      tty21  tty49 ttyS17     vcs2
disk             loop6               sg0       tty22  tty5 ttyS18     vcs3
dri              loop7               sg1       tty23  tty50 ttyS19     vcs4
dvd              loop-control        sg2       tty24  tty51 ttyS2      vcs5
dvdrw            mapper              sg3       tty25  tty52 ttyS20     vcs6
ecryptfs         mcelog              sg4       tty26  tty53 ttyS21     vcsa
fb0              mem                 sg5       tty27  tty54 ttyS22     vcsa1
fd               memory_bandwidth    sg6       tty28  tty55 ttyS23     vcsa2
full             mqueue              shm       tty29  tty56 ttyS24     vcsa3
fuse             net                 snapshot  tty3   tty57 ttyS25     vcsa4
hidraw0          network_latency     snd       tty30  tty58 ttyS26     vcsa5
hidraw1          network_throughput  sr0       tty31  tty59 ttyS27     vcsa6
hpet             null                stderr    tty32  tty6 ttyS28     vfio
hugepages        port                stdin     tty33  tty60 ttyS29     
vga_arbiter
hwrng            ppp                 stdout    tty34  tty61 ttyS3      vhci
i2c-0            psaux               tty       tty35  tty62 ttyS30     
vhost-net
i2c-1            ptmx                tty0      tty36  tty63 ttyS31     zero
i2c-2            pts                 tty1      tty37  tty7   ttyS4
i2c-3            random              tty10     tty38  tty8   ttyS5
rick at rick-ham ~ $ ls /dev/usb
hiddev0
rick at rick-ham ~ $ ls /dev/usb << with RT systems cord unplugged
hiddev0
rick at rick-ham ~ $



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171016/0c27b824/attachment-0002.html 


More information about the chirp_users mailing list