[chirp_users] Connecting to my FT2DR

Jim Unroe rock.unroe at gmail.com
Sat Oct 14 13:45:11 PDT 2017


On Sat, Oct 14, 2017 at 3:50 PM, rick via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> Running Linux Mint 18.2
>
> Loaded newest release version of Chirp-daily (CHIRP daily-20171013)
>
> When I try to download from radio, this error message is displayed before I
> can press send on the radio
>
> X An error has occurred
> Could not configure port: (5, 'input/output error')
>
> Attached png is screengrab
>
> I did some further digging and tried the first 10 "ttyS*" with the same
> results.
>
> lsusb command provides bus and device numbers but not which ttyS* is in use.
>
> Any Help?
>

I also run Linux Mint here. If you are using a USB based programming
cable you must scroll all the way down to the bottom of the list and
choose: /dev/ttyUSB0

Jim



More information about the chirp_users mailing list