[chirp_users] Btech UV-25X4

Doc Stevens
Sun Oct 1 16:48:35 PDT 2017

I use CHIRP on my UV-25X4 and UV-50X2.  Check the settings tab in CHIRP, sub 
tab Work Mode Settings.  There you will find MR A thru D and VFO A thru D. 
Even when set, these appear to have little impact.  Jim (see thread comment 
below) is correct.  Any time I power on my rig, what is in CHIRP memory 
channel #0 is active in position #3 of the display.  In my case,  I have 
display #3 and #4 synced with #3 the frequency and #4 the tag.  This is not 
a problem for me since I monitor this particular repeater.  Just put in 
CHIRP memory #0 what you want to monitor on rig position #3.   Great radios 
these Baofengs!

----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Saturday, September 30, 2017 8:47 PM
Subject: Re: [chirp_users] Btech UV-25X4

> On Sat, Sep 30, 2017 at 3:49 PM, Greg Petrey <KF5MHA at arrl.net> wrote:
>> I know it is something I'm doing wrong but I can't get the Btech UV-25X4 
>> to
>> program.  I can read the radio, update the templete and upload to the 
>> radio
>> but it doesn't overwrite the display so my new channels only show up in
>> position 4 on the display.  The default channels remain in position 1-3. 
>> If
>> someone has experience with this radio, please contact me offline or 
>> share a
>> working file that I can compare.
>> Thanking you in advance.
>> Greg
> This is a bug in the radio. Manually select the channels that you want
> in each display line. Then remove power from the radio (turning it off
> is not enough). Power it back up. Display lines 3 and 4 will have
> reverted to the lowest programmed channel number.
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Doc Stevens at docstevens at bellsouth.net
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com

More information about the chirp_users mailing list