[chirp_users] Hesenate vhf/uhf
nanapapanicholson at verizon.net
Mon Nov 27 08:53:51 PST 2017
Yes my radio is the HT-UV8R. When I connect the cable to the USB port device mgr. saysUSB serial port no driver available. Search for drivers and get non. If I connect radio to cable device mgr. remains the same. Where do I to install Baofeng as vender, when I search for driver?
From: Jim Unroe <rock.unroe at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Sun, Nov 26, 2017 10:11 pm
Subject: Re: [chirp_users] Hesenate vhf/uhf
On Sun, Nov 26, 2017 at 2:15 PM, Ray Nicholson
<nanapapanicholson at verizon.net> wrote:
> Bought a Hesenate transceiver and cannot get to connect to PC. I also
> purchased a Baofeng cable & downloaded CHIRP from the Chirp web site for
> windows. Do I need a special driver for the software to connect or does it
> come imbedded in the software? The spread sheet shows under file new but
> cannot save entries made.
You didn't say the model of the radio that you purchased so it may not
be supported by CHIRP.
No programming software will work if there is not a complete and
working connection between the radio and computer. If the programming
cable has a counterfeit Prolific, then you must download, install and
select the older V18.104.22.168 device driver.
If you have the HESENATE model HT-UV8R, then it looks like a BF-F8HP
variant. Then you would select Baofeng as the Vendor and BF-F8HP as
chirp_users mailing list
chirp_users at intrepid.danplanet.com
This message was sent to Ray at nanapapanicholson at verizon.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users