[chirp_users] Hesenate vhf/uhf

Jim Unroe rock.unroe at gmail.com
Sun Nov 26 19:09:58 PST 2017


On Sun, Nov 26, 2017 at 2:15 PM, Ray Nicholson
<nanapapanicholson at verizon.net> wrote:
> Bought a Hesenate transceiver and cannot get to connect to PC.  I also
> purchased a Baofeng cable & downloaded CHIRP from the Chirp web site for
> windows.  Do I need a special driver for the software to connect or does it
> come imbedded in the software?  The spread sheet shows under file new but
> cannot save entries made.
> Ray
>

Hi Ray,

You didn't say the model of the radio that you purchased so it may not
be supported by CHIRP.

No programming software will work if there is not a complete and
working connection between the radio and computer. If the programming
cable has a counterfeit Prolific, then you must download, install and
select the older V3.2.0.0 device driver.

If you have the HESENATE model HT-UV8R, then it looks like a BF-F8HP
variant. Then you would select Baofeng as the Vendor and BF-F8HP as
the Model.

Jim KC9HI



More information about the chirp_users mailing list