[chirp_users] Hesenate vhf/uhf

[Amnon Zohar]

Check on device mannager if the driver was properly installed.

בתאריך 27 בנוב' 2017 19:01,‏ "Amnon Zohar" <amnon.zohar at gmail.com> כתב:

> No you download the driver for the cable and chose the radio model in chirp
>
> בתאריך 27 בנוב' 2017 18:57,‏ "Ray Nicholson" <
> nanapapanicholson at verizon.net> כתב:
>
>> Hi Jim
>> Yes my radio is the HT-UV8R.  When I connect the cable to the USB port
>> device mgr. saysUSB serial port no driver available.  Search for drivers
>> and get non.  If I connect radio to cable device mgr. remains the same.
>> Where do I to install Baofeng as vender, when I search for driver?
>> Ray  W3EGG
>>
>>
>> -----Original Message-----
>> From: Jim Unroe <rock.unroe at gmail.com>
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Sent: Sun, Nov 26, 2017 10:11 pm
>> Subject: Re: [chirp_users] Hesenate vhf/uhf
>>
>> On Sun, Nov 26, 2017 at 2:15 PM, Ray Nicholson
>> <nanapapanicholson at verizon.net> wrote:
>> > Bought a Hesenate transceiver and cannot get to connect to PC. I also
>> > purchased a Baofeng cable & downloaded CHIRP from the Chirp web site for
>> > windows. Do I need a special driver for the software to connect or does
>> it
>> > come imbedded in the software? The spread sheet shows under file new but
>> > cannot save entries made.
>> > Ray
>> >
>>
>> Hi Ray,
>>
>> You didn't say the model of the radio that you purchased so it may not
>> be supported by CHIRP.
>>
>> No programming software will work if there is not a complete and
>> working connection between the radio and computer. If the programming
>> cable has a counterfeit Prolific, then you must download, install and
>> select the older V3.2.0.0 device driver.
>>
>> If you have the HESENATE model HT-UV8R, then it looks like a BF-F8HP
>> variant. Then you would select Baofeng as the Vendor and BF-F8HP as
>> the Model.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ray at nanapapanicholson at verizon.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to amnon at amnon.zohar at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171127/c8df6e89/attachment.html