[chirp_users] BaoFeng BF-F8+ issue

[Chase Bolyard]

In the past I've not had any luck trying to do that due to different
firmware versions

On Nov 16, 2017 11:35 PM, "Neil B" <ne.b at hotmail.co.uk> wrote:

> i mean use the non beeper image and write that into beeper. not manually
> copy settings :-)
>
>
> ------------------------------
> *From:* chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> on behalf of Chase Bolyard <
> cowboyona426 at gmail.com>
> *Sent:* 17 November 2017 06:02
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] BaoFeng BF-F8+ issue
>
> I copied the channels from the non beeper into the beeper radios file.
> Made all settings match in CHIRP on all option tabs, and made all settings
> in both radios match as well. Issue persists
>
> On Nov 16, 2017 9:51 PM, "Neil B" <ne.b at hotmail.co.uk> wrote:
>
> have u tried reading the non beeper and then writing that into the beeper.
> does that work?
>
>
>
> ------------------------------
> *From:* chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> on behalf of Chase Bolyard <
> cowboyona426 at gmail.com>
> *Sent:* 17 November 2017 05:23
> *To:* chirp_users at intrepid.danplanet.com
> *Subject:* [chirp_users] BaoFeng BF-F8+ issue
>
> I'm attempting to program a second BF-F8+ radio identical to my first one,
> but no matter what I try I can not get the power on beep to turn off.  I
> have verified all settings in CHIRP to be correct, as well as those in the
> radio (to the best of my knowledge).  One radio does not beep on power up
> (which is what I prefer), the other does.  Any suggestions?
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7C8b2e6d9dccd24539f91408d52d80d1f2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636464953650946526&sdata=P1J1fsfNlTpFHCI6IfqHQPqFwi%2BQkCBqWoNx9XqZYTU%3D&reserved=0>
> This message was sent to cowboyona426 at gmail.com at cowboyona426 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> id.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to cowboyona426 at gmail.com at cowboyona426 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171117/25101a7b/attachment.html