[chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12

[Peter J. McClosky]

Jeff, 

When I get this message it is one of two problems: 

The first is I go between steps (Menus) to fast.  I slow down and give about 5 to 10 seconds between steps. and the radio programing works.

 or 

I do not have the cable pushed in far enough.  What I do then is push the cable into the radio quite hard and while still holding the cable and radio run the progaming (Make sure not transmit at the same time).

I do not know if that is the problem you are having, the these ”fixes” work for me.

N7IY, Peter

-----
Peter J. McClosky, N7IY
Eugene, Oregon
pmcclosky at earthlink.net
n7iy at arrl.net
http://home.earthlink.net/~pmcclosky/

> On May 29, 2017, at 7:22 PM, Jeff Davis <kf5hqe.jeff at gmail.com> wrote:
> 
> Hi Folks,
> 
> I’m running a MacBook Pro using OS 10.12.5.  I’ve received three different radios along with USB to BaoFang connection cables.
> 
> When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it.
> 
> But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png>
> 
> Any ideas?  I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results.
> 
> Thank you in advance.
> 
> Jeff Davis
> KF5HQE
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Peter at pmcclosky at earthlink.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170529/43e0df8f/attachment.html