[chirp_users] Cannot read Baofeng BF-888S

[James Flanders]

OK then; Who has had good experience reading the BF-888s, and how?


 

 

James Flanders
w0oog at verizon.net

 

 

-----Original Message-----
From: Kirby <joekirby at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Fri, May 19, 2017 6:34 am
Subject: Re: [chirp_users] Cannot read Baofeng BF-888S

On 19/05/17 11:22, Nate Alvin wrote:
> going to expire.  Using the same computer, same "fake prolific" Baofeng
> cloning cable and the updated daily CHIRP software i was able to
> reprogram the UV5R, but when i went to read the BF888S i received the
> error message "radio refused to enter programming mode".  Any help would
> be appreciated.  Thanks

I have had the same issue using Fedora. If I repeat trying to read/write
the BF888S about 90% of the attempts fail, but every once in a while it
works.

-- 




_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jim at w0oog at verizon.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170519/8733ba05/attachment.html