[chirp_users] Aviation radio programming

[Bruce MacAlister]

My Kenwood TH-7 receives everything from 60Hz hum to about 500MHz,
FM, SSB, etc. I have all kinds of receive-only frequencies programmed in
using Chirp. It works well.

73, Peace,سلام ,שָׁלוֹם, ειρήνη, Bruce ∞

On Sun, May 14, 2017 at 5:40 PM, Jardy Dawson via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> Why would the CHIRP developers add aviation radios, when they cover ham
> and Part 90 radios?  In my area, we have close to 50-60 (?) air strips
> ranging from Portland Int'l (PDX) to little grass strips you can barely
> tell are airstrips. They all share maybe 12 freqs.  There are no tones or
> repeater offsets to worry about, so all you need to do is program those in
> and have a convenient list of what airports use what, or just use vfo.
> Easy enough to do without software.
>
> Silver Star Search and Rescue www.silverstarsar.org
> Washington Air Search and Rescue www.wasar.org
> Clark County ARES/Races www.ccareswa.org
>
>
> Jardy Dawson
> WA7JRD Ham Radio
>
> Message relayed from secret Hillary Clinton server, located in the
> basement of her house.  OOPS, you aren't supposed to know that!
>
> On May 14, 2017, at 12:37, Stokes Smith <stokesjs at bellsouth.net> wrote:
>
> Has anyone used CHIRP to program aviation radios? I recently obtained a
> Yaesu VXA-200 and would like to use CHIRP as I use it for my Wouxon radio.
> The Yaesu software is not readily available.
>
> Thanks for all y'all do! Chirp is a fantastic program.
>
> Stokes
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Bruce MacAlister at w4bru at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170514/1fdda0df/attachment.html