[chirp_users] Help

[Stan M]

Put "all" your channel into the "one" memory,
then dial up the channels you want on A B C D
note 220 band, you will hear a relay clicking as it band selects

On Mon, May 8, 2017 at 9:23 AM, Brewster <brewsterdive at gmail.com> wrote:

> *I recently purchased a QYT KT 7900D radio and uploaded frequencies to it
> using the latest version of CHIRP. The problem is that all the frequencies
> go into all of the four different bands. The radio as described has four
> "channels", A-D. What I am trying to do is assign the 2 meter band to
> channel A, the 220 Mhz band to channel B, the FRS/MURS/GMRS frequencies to
> channel C, and the 440 Mhz band to channel D. Has anyone had any experience
> with this radio and frequency allotments such as I describe? *
> *Thanks,*
> *Bruce AD8K*
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to stan at qslstan at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170508/ad2ca355/attachment.html