[chirp_users] chirp_users Digest, Vol 101, Issue 1
Chere McCoy
Tue May 2 10:40:55 PDT 2017
I have a Baofeng BF-F8HP I can receive but not transmit
What settings have I messed up and how do I fix it
73. Km4Uuq
chirp_users-request at intrepid.danplanet.com wrote:
Send chirp_users mailing list submissions to
chirp_users at intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request at intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner at intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: Unable to Install CHIRP software to Windows 10
(Torbj?rn Darre)
2. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe)
3. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe)
4. Transmit Problems (DonieAllen1971 at Yahoo.com)
5. Re: Transmit Problems (Glenn At Home)
6. Re: Transmit Problems (Mike McRoberts)
7. Re: Transmit Problems (Daniel Humphries)
8. Re: Transmit Problems (Jardy)
9. Re: Transmit Problems (Jardy)
10. Re: Transmit Problems (Carrie Jackson)
11. Re: Transmit Problems (kc6iih at aol.com)
12. Re: Transmit Problems (Jardy)
13. New Daily Build (Build System)
14. Re: Transmit Problems (Jim Unroe)
15. Re: Transmit Problems (Bill KA8VIT)
16. BF 888s and UV5R (Nate Alvin)
17. Re: BF 888s and UV5R (Neil B)
18. Re: Transmit Problems (Baji Panchumarti)
19. Re: BF 888s and UV5R (Nate Alvin)
20. Re: BF 888s and UV5R (Neil B)
----------------------------------------------------------------------
Message: 1
Date: Sun, 30 Apr 2017 21:02:59 +0200
From: Torbj?rn Darre <torbjorn.darre at lyse.net>
Subject: Re: [chirp_users] Unable to Install CHIRP software to Windows
10
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Message-ID: <203c-59063500-1-47a73600 at 189506587>
Content-Type: text/plain; charset="utf-8"
Hei,
The error is Error reporting is enabled and it does does not open the software.
Yes my Windows user does contain ?.? My e-mail adresses does not contain ? and my CHIRP user does not contain ?.?
I will try to make a new windows account user with out ? and see if that works.
73, Torbj?rn
LA8TP
S?ndag 30. April 2017 16:20 CEST skrev Jim Unroe <rock.unroe at gmail.com>:
?On Sun, Apr 30, 2017 at 8:21 AM, Torbj?rn Darre <torbjorn.darre at lyse.net> wrote:
> Hei,
>
> I am new to CHIRP web site and CHIRP software.
> I got an error when I down loaded the CHIRP software to my Windows10 PC. I
> am not able to open the software when I have done a succefull and complete
> installation.
> What do I need to do?
>
> 73,
> Torbj?rn,
> LA8TP
So what is the error? Does you Windows user name have the "?"
character in it? If yes, try another user with only standard
characters.
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Torbjoern Darre at torbjorn.darre at lyse.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
--
hilsen
Torbj?rn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/7e3b79d6/attachment-0001.html
------------------------------
Message: 2
Date: Sun, 30 Apr 2017 15:53:37 -0400
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Unable to Install CHIRP software to Windows
10
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CADnO8U5q=ebt5ycRa_SJKA-t=KgmgbAu_Erg24yOS3m6QA42iw at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
On Sun, Apr 30, 2017 at 3:02 PM, Torbj?rn Darre <torbjorn.darre at lyse.net> wrote:
> Hei,
>
> The error is Error reporting is enabled and it does does not open the
> software.
>
> Yes my Windows user does contain ?. My e-mail adresses does not contain ?
> and my CHIRP user does not contain ?.
>
> I will try to make a new windows account user with out ? and see if that
> works.
>
> 73, Torbj?rn
> LA8TP
>
>
> S?ndag 30. April 2017 16:20 CEST skrev Jim Unroe <rock.unroe at gmail.com>:
>
>
> On Sun, Apr 30, 2017 at 8:21 AM, Torbj?rn Darre <torbjorn.darre at lyse.net>
> wrote:
>> Hei,
>>
>> I am new to CHIRP web site and CHIRP software.
>> I got an error when I down loaded the CHIRP software to my Windows10 PC. I
>> am not able to open the software when I have done a succefull and complete
>> installation.
>> What do I need to do?
>>
>> 73,
>> Torbj?rn,
>> LA8TP
>
>
>
> So what is the error? Does you Windows user name have the "?"
> character in it? If yes, try another user with only standard
> characters.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Torbjoern Darre at torbjorn.darre at lyse.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
> --
> hilsen
> Torbj?rn
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jim at rock.unroe at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
------------------------------
Message: 3
Date: Sun, 30 Apr 2017 15:57:40 -0400
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Unable to Install CHIRP software to Windows
10
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CADnO8U5C5et6T447QMjmUGreok1VWy+FVi=dp4DEriaTv3cKCw at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
> The error is Error reporting is enabled and it does does not open the
> software.
This is not an error. Everyone sees it on a new installation of CHIRP.
It is letting you know that the default for CHIRP is to "phone home"
when there is an error and that you can disable it if you don't want
this behavior. Just click through and start using CHIRP.
Jim
------------------------------
Message: 4
Date: Sun, 30 Apr 2017 21:21:32 -0400
From: <DonieAllen1971 at Yahoo.com>
Subject: [chirp_users] Transmit Problems
To: "chirp_users at intrepid.danplanet.com"
<chirp_users at intrepid.danplanet.com>
Message-ID: <316820.16983.bm at smtp229.mail.bf1.yahoo.com>
Content-Type: text/plain; charset="utf-8"
In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
Below is a list of the settings I set in CHIRP for this channel.
Name = TripFreq
Frequency = 462.562500
Mode = NFM
Power = Low
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/83eaeb4a/attachment-0001.html
------------------------------
Message: 5
Date: Sun, 30 Apr 2017 21:02:16 -0500
From: "Glenn At Home" <GlennErvin at cableone.net>
Subject: Re: [chirp_users] Transmit Problems
To: <DonieAllen1971 at Yahoo.com>, "Discussion of CHIRP"
<chirp_users at intrepid.danplanet.com>
Message-ID: <004601d2c21e$f5d8f6d0$0601a8c0 at NUCPPYH>
Content-Type: text/plain; charset="utf-8"
I wonder if it is his radio.
Maybe he has the receive tone set to a frequency, so he will only hear radios transmitting with that tone.
Glenn
----- Original Message -----
From: Jake via chirp_users
To: chirp_users at intrepid.danplanet.com
Sent: Sunday, April 30, 2017 8:21 PM
Subject: [chirp_users] Transmit Problems
In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
Below is a list of the settings I set in CHIRP for this channel.
Name = TripFreq
Frequency = 462.562500
Mode = NFM
Power = Low
--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/d4b0845a/attachment-0001.html
------------------------------
Message: 6
Date: Sun, 30 Apr 2017 19:09:44 -0700
From: Mike McRoberts <mike at mcrhome.com>
Subject: Re: [chirp_users] Transmit Problems
To: DonieAllen1971 at yahoo.com, Discussion of CHIRP
<chirp_users at intrepid.danplanet.com>
Message-ID:
<CAPqV4Vc5mZ17foufO9GLTdgEsZWaO-BtZiG_goUeEykkAb_V4w at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
It sounds like his radio may have a CTCSS, or P/L tone enabled on his
receive.
Secondly, unless you have a GMRS license, your UV-5RA violates 47 C.F.R,
Part 95 Subpart B by having a removeable antenna and being able to transmit
at more than 500 milliwatts (1/2 watt).
Check out the following URL for details directly from the FCC web page.
Click on the Operations tab for specific details.
https://www.fcc.gov/wireless/bureau-divisions/mobility-division/family-radio-service-frs
73 de Mike/KD6FTR
-
about.me/kd6ftr
On Sun, Apr 30, 2017 at 6:21 PM, Jake via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:
>
> In a few weeks some friends and I are going on a 10 day camping trip. We
will be several miles back into a wooded area. I would like to use my use
my Baofeng UV-5RA during this trip to communicate with my buddies radio he
picked up from a surplus store. I can receive his transmissions but he
cannot receive my transmissions. I am not sure what setting to adjust in
chirp.
>
>
>
> Below is a list of the settings I set in CHIRP for this channel.
>
>
>
> Name = TripFreq
>
> Frequency = 462.562500
>
> Mode = NFM
>
> Power = Low
>
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike/KD6FTR at mike at mcrhome.com
> To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/853bf736/attachment-0001.html
------------------------------
Message: 7
Date: Sun, 30 Apr 2017 19:17:10 -0700
From: Daniel Humphries <kornphlake79 at gmail.com>
Subject: Re: [chirp_users] Transmit Problems
To: "DonieAllen1971 at yahoo.com" <DonieAllen1971 at yahoo.com>, Discussion
of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CAHxz3EMZvm44+=C=0Uogx=UGwD960+tH5LtLRu8BV0MHJ+eqBg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Check to make sure your radio is not using a frequency offset to transmit,
if you are using a ctcs or dcs tone, it should be the same tone for both
radios on send and receive.
Your radio is not licensed to use the frequency you have selected in the
US. That said I don't believe the FCC has resources to monitor GMRS
channels deep in the woods. I don't expect this warning to affect your
decision, but I feel obligated to inform you of the law I may have assisted
you in breaking.
On Sunday, April 30, 2017, Jake via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:
> In a few weeks some friends and I are going on a 10 day camping trip. We
> will be several miles back into a wooded area. I would like to use my use
> my Baofeng UV-5RA during this trip to communicate with my buddies radio he
> picked up from a surplus store. I can receive his transmissions but he
> cannot receive my transmissions. I am not sure what setting to adjust in
> chirp.
>
>
>
> Below is a list of the settings I set in CHIRP for this channel.
>
>
>
> Name = TripFreq
>
> Frequency = 462.562500
>
> Mode = NFM
>
> Power = Low
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/7d146258/attachment-0001.html
------------------------------
Message: 8
Date: Sun, 30 Apr 2017 19:17:07 -0700
From: Jardy <jardy72 at yahoo.com>
Subject: Re: [chirp_users] Transmit Problems
To: DonieAllen1971 at Yahoo.com, Discussion of CHIRP
<chirp_users at intrepid.danplanet.com>
Message-ID: <23A0C57E-52BF-4D6B-B3F7-B93455CCF52D at yahoo.com>
Content-Type: text/plain; charset="us-ascii"
That is an illegal use of the radio.
Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator.
> On Apr 30, 2017, at 18:21, Jake via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
>
> Below is a list of the settings I set in CHIRP for this channel.
>
> Name = TripFreq
> Frequency = 462.562500
> Mode = NFM
> Power = Low
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/ddd90109/attachment-0001.html
------------------------------
Message: 9
Date: Sun, 30 Apr 2017 19:33:33 -0700
From: Jardy <jardy72 at yahoo.com>
Subject: Re: [chirp_users] Transmit Problems
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <4A0CCFC8-4DC6-484C-AC28-C657AE5739BF at yahoo.com>
Content-Type: text/plain; charset="us-ascii"
Illegal use should not be encouraged for any reason.
Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator.
> On Apr 30, 2017, at 19:02, Glenn At Home <GlennErvin at cableone.net> wrote:
>
> I wonder if it is his radio.
> Maybe he has the receive tone set to a frequency, so he will only hear radios transmitting with that tone.
> Glenn
> ----- Original Message -----
> From: Jake via chirp_users
> To: chirp_users at intrepid.danplanet.com
> Sent: Sunday, April 30, 2017 8:21 PM
> Subject: [chirp_users] Transmit Problems
>
> In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
>
> Below is a list of the settings I set in CHIRP for this channel.
>
> Name = TripFreq
> Frequency = 462.562500
> Mode = NFM
> Power = Low
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/baa767be/attachment-0001.html
------------------------------
Message: 10
Date: Sun, 30 Apr 2017 21:48:59 -0500
From: Carrie Jackson <mssjacksonifyournasty at gmail.com>
Subject: Re: [chirp_users] Transmit Problems
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <B20863CB-EC58-4EC7-A594-E3204099BCFA at gmail.com>
Content-Type: text/plain; charset="us-ascii"
Have fun in Canada. I love you.
Miss Jackson
On Apr 30, 29 Heisei, at 21:09, Mike McRoberts <mike at mcrhome.com> wrote:
It sounds like his radio may have a CTCSS, or P/L tone enabled on his receive.
Secondly, unless you have a GMRS license, your UV-5RA violates 47 C.F.R, Part 95 Subpart B by having a removeable antenna and being able to transmit at more than 500 milliwatts (1/2 watt).
Check out the following URL for details directly from the FCC web page. Click on the Operations tab for specific details.
https://www.fcc.gov/wireless/bureau-divisions/mobility-division/family-radio-service-frs
73 de Mike/KD6FTR
-
about.me/kd6ftr
On Sun, Apr 30, 2017 at 6:21 PM, Jake via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
>
>
>
> Below is a list of the settings I set in CHIRP for this channel.
>
>
>
> Name = TripFreq
>
> Frequency = 462.562500
>
> Mode = NFM
>
> Power = Low
>
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike/KD6FTR at mike at mcrhome.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Miss_Jackson at mssjacksonifyournasty at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/39a7c108/attachment-0001.html
------------------------------
Message: 11
Date: Sun, 30 Apr 2017 23:04:12 -0400
From: kc6iih at aol.com
Subject: Re: [chirp_users] Transmit Problems
To: chirp_users at intrepid.danplanet.com
Message-ID: <15bc1f728e6-6e76-10733 at webprd-m55.mail.aol.com>
Content-Type: text/plain; charset="utf-8"
That would be illegal unless persons using the radios are licensed operators.
Jock Soutar KC6IIH
Sent via Samsung Galaxy S7
on AT&T 4G LTE Smartphone
On Sunday, April 30, 2017 Jake via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
?
Below is a list of the settings I set in CHIRP for this channel.
?
Name = TripFreq
Frequency = 462.562500
Mode = NFM
Power = Low
?
?
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jock at kc6iih at aol.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/4e2c5ba4/attachment-0001.html
------------------------------
Message: 12
Date: Sun, 30 Apr 2017 20:56:10 -0700
From: Jardy <jardy72 at yahoo.com>
Subject: Re: [chirp_users] Transmit Problems
To: kc6iih at aol.com, Discussion of CHIRP
<chirp_users at intrepid.danplanet.com>
Message-ID: <0CFDC3F1-D766-4343-9CCD-0C1DDC88DA5B at yahoo.com>
Content-Type: text/plain; charset="us-ascii"
The radios would be legal for ham radio operators on ham frequencies. The radio does not qualify for GMRS whether or not the operators are licensed.
Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator.
> On Apr 30, 2017, at 20:04, Jock via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> That would be illegal unless persons using the radios are licensed operators.
>
> Jock Soutar KC6IIH
> Sent via Samsung Galaxy S7
> on AT&T 4G LTE Smartphone
>
>
>
> On Sunday, April 30, 2017 Jake via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
>
>
>
> Below is a list of the settings I set in CHIRP for this channel.
>
>
>
> Name = TripFreq
>
> Frequency = 462.562500
>
> Mode = NFM
>
> Power = Low
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jock at kc6iih at aol.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170430/ddd1d9b2/attachment-0001.html
------------------------------
Message: 13
Date: Mon, 1 May 2017 00:07:53 -0700 (PDT)
From: Build System <donotreply at danplanet.com>
Subject: [chirp_users] New Daily Build
To: chirp_users at intrepid.danplanet.com
Message-ID:
<1888983850.15.1493622473207.JavaMail.jenkins at eagle.danplanet.com>
Content-Type: text/plain; charset="utf-8"
Greetings,
A new daily build of CHIRP is available. This includes changes made
directly to the tree yesterday, and may include additional features,
bug fixes, and/or bugs. If you are interested in trying it, grab it
from the following location:
http://trac.chirp.danplanet.com/chirp_daily/daily-20170501
A list of the changes included in this build (since the last daily)
follows:
Changes for Build #479
[SASANO Takayoshi <uaa at mx5.nisiq.net>] previous patch for bug #4687 causes PEP8 regression problem,
"E261 at least two spaces before inline comment".
Replace a tab character to two spaces to fix the problem.
[Dan Smith <dsmith at danplanet.com>] Revert accidental commit
#0
Backed out changeset f9a81de5297b
------------------------------
Message: 14
Date: Mon, 1 May 2017 06:28:15 -0400
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Transmit Problems
To: Donie Allen <DonieAllen1971 at yahoo.com>, Discussion of CHIRP
<chirp_users at intrepid.danplanet.com>
Message-ID:
<CADnO8U4fobqh=g4T-TOWKoLTwi8pxLntwU7k6ENFs_Eoe+d41g at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
On Sun, Apr 30, 2017 at 9:21 PM, Jake via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I can receive his transmissions but he cannot receive my transmissions.
You must either get you friend to disable receive CTCSS on his radio
your you must program your radio to transmit the matching CTCSS tone.
http://www.miklor.com/COM/UV_CTCSS.php
Jim KC9HI
------------------------------
Message: 15
Date: Mon, 1 May 2017 07:32:52 -0400 (EDT)
From: Bill KA8VIT <ka8vit at ka8vit.com>
Subject: Re: [chirp_users] Transmit Problems
To: DonieAllen1971 at Yahoo.com, Discussion of CHIRP
<chirp_users at intrepid.danplanet.com>
Message-ID: <1732133046.242006.1493638373004 at email.1and1.com>
Content-Type: text/plain; charset=UTF-8
Not sure what your friend's radio is but it sounds like they may have CTCSS or PL turned on.
73 - Bill KA8VIT
> On April 30, 2017 at 9:21 PM Jake via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp.
>
> Below is a list of the settings I set in CHIRP for this channel.
>
> Name = TripFreq
>
> Frequency = 462.562500
>
> Mode = NFM
>
> Power = Low
>
> ?
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to ka8vit at ka8vit.com at ka8vit at ka8vit.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
====================================
Bill Chaikin, KA8VIT
USS COD Amateur Radio Club - W8COD
WW2 Submarine USS COD SS-224 (NECO)
ka8vit at ka8vit.com
http://ka8vit.com
http://www.usscod.org
====================================
------------------------------
Message: 16
Date: Mon, 1 May 2017 10:50:40 -0500
From: Nate Alvin <mypersonalspamfilternc at gmail.com>
Subject: [chirp_users] BF 888s and UV5R
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CAKzXrncdLy_BvAPXSTxbgp_C7huNS4FMsCe7yjwRsBrY9Rc2pg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
About 6 weeks ago, i purchased the 2 radios listed in the subject line to
test them out for work. I programmed them both to the frequencies assigned
to our license. We were assigned a corporate license recently, with
different frequencies, vs our stand alone site license which is going to
expire. Using the same computer, same "fake prolific" Baofeng cloning
cable and the updated daily CHIRP software i was able to reprogram the
UV5R, but when i went to read the BD888S i received the error message
"radio refused to enter programming mode". Any help would be appreciated.
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/70babd8c/attachment-0001.html
------------------------------
Message: 17
Date: Mon, 1 May 2017 16:51:04 +0000
From: Neil B <ne.b at hotmail.co.uk>
Subject: Re: [chirp_users] BF 888s and UV5R
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<LO1P123MB120400FD7955AC6B1805BDF0D5140 at LO1P123MB1204.GBRP123.PROD.OUTLOOK.COM>
Content-Type: text/plain; charset="iso-8859-1"
may be silly question, but did you change radio type to the bf 888? easy common thing to do lol....
________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Nate Alvin <mypersonalspamfilternc at gmail.com>
Sent: 01 May 2017 16:50
To: Discussion of CHIRP
Subject: [chirp_users] BF 888s and UV5R
About 6 weeks ago, i purchased the 2 radios listed in the subject line to test them out for work. I programmed them both to the frequencies assigned to our license. We were assigned a corporate license recently, with different frequencies, vs our stand alone site license which is going to expire. Using the same computer, same "fake prolific" Baofeng cloning cable and the updated daily CHIRP software i was able to reprogram the UV5R, but when i went to read the BD888S i received the error message "radio refused to enter programming mode". Any help would be appreciated. Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/4ef55abd/attachment-0001.html
------------------------------
Message: 18
Date: Mon, 1 May 2017 13:14:16 -0400
From: Baji Panchumarti <ohiobaji at gmail.com>
Subject: Re: [chirp_users] Transmit Problems
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Cc: DonieAllen1971 at yahoo.com
Message-ID:
<CAM=xYAc9VooJiX9OENSmTd-bY+qnZ_gc4yEhC=RrB5bA5GVsVA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
You may find the two links below helpful:
http://www.hamuniverse.com/w7dtguv5rprogramming.html
I haven't seen the entire video below, but it seems to be on the right
track:
https://www.youtube.com/watch?v=ml6cyOjBTHY
-baji.
~~
? ?
On Mon, May 1, 2017 at 7:32 AM, Bill KA8VIT
??
wrote:
Not sure what your friend's radio is but it sounds like they may have CTCSS
> or PL turned on.
>
> 73 - Bill KA8VIT
>
>
> > On April 30, 2017 at 9:21 PM Jake via chirp_users wrote:
> >
> > In a few weeks some friends and I are going on a 10 day camping trip. We
> will be several miles back into a wooded area. I would like to use my use
> my Baofeng UV-5RA during this trip to communicate with my buddies radio he
> picked up from a surplus store. I can receive his transmissions but he
> cannot receive my transmissions. I am not sure what setting to adjust in
> chirp.
> >
> > Below is a list of the settings I set in CHIRP for this channel.
> >
> > Name = TripFreq
> >
> > Frequency = 462.562500
> >
> > Mode = NFM
> >
> > Power = Low
> >
> >
> > ___
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/627b8136/attachment-0001.html
------------------------------
Message: 19
Date: Mon, 1 May 2017 12:25:18 -0500
From: Nate Alvin <mypersonalspamfilternc at gmail.com>
Subject: Re: [chirp_users] BF 888s and UV5R
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CAKzXrne-j=4RakeuK5h7bGf_7tTF_QzF-mjCw0nb06SVOWa3BA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Good question, but yes i did change setting from uv5r to the 888
On May 1, 2017 12:23 PM, "Neil B" <ne.b at hotmail.co.uk> wrote:
> may be silly question, but did you change radio type to the bf 888? easy
> common thing to do lol....
>
>
> ------------------------------
> *From:* chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> on behalf of Nate Alvin <
> mypersonalspamfilternc at gmail.com>
> *Sent:* 01 May 2017 16:50
> *To:* Discussion of CHIRP
> *Subject:* [chirp_users] BF 888s and UV5R
>
> About 6 weeks ago, i purchased the 2 radios listed in the subject line to
> test them out for work. I programmed them both to the frequencies assigned
> to our license. We were assigned a corporate license recently, with
> different frequencies, vs our stand alone site license which is going to
> expire. Using the same computer, same "fake prolific" Baofeng cloning
> cable and the updated daily CHIRP software i was able to reprogram the
> UV5R, but when i went to read the BD888S i received the error message
> "radio refused to enter programming mode". Any help would be appreciated.
> Thanks
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/525280e0/attachment-0001.html
------------------------------
Message: 20
Date: Mon, 1 May 2017 18:52:34 +0000
From: Neil B <ne.b at hotmail.co.uk>
Subject: Re: [chirp_users] BF 888s and UV5R
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<LO1P123MB12047C057C69B36AE152C5C4D5140 at LO1P123MB1204.GBRP123.PROD.OUTLOOK.COM>
Content-Type: text/plain; charset="iso-8859-1"
ok. just a thought lol.
have you got the latest version of chirp?
have you tried slecting each radio type and do a read attempt.
its the plug sitting home in the radio as some varients the plug dont go all the way in, give it a squeeze while trying to read.
I have a gt-3tp mk3 and until the later update last month, it was only programmable using the uv-5r menu. due to the firmware version in the radio.
cant be anything wrong with the lead/usb/windows, as its working on the other radio.
________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Nate Alvin <mypersonalspamfilternc at gmail.com>
Sent: 01 May 2017 18:25
To: Discussion of CHIRP
Subject: Re: [chirp_users] BF 888s and UV5R
Good question, but yes i did change setting from uv5r to the 888
On May 1, 2017 12:23 PM, "Neil B" <ne.b at hotmail.co.uk<mailto:ne.b at hotmail.co.uk>> wrote:
may be silly question, but did you change radio type to the bf 888? easy common thing to do lol....
________________________________
From: chirp_users-bounces at intrepid.danplanet.com<mailto:chirp_users-bounces at intrepid.danplanet.com> <chirp_users-bounces at intrepid.danplanet.com<mailto:chirp_users-bounces at intrepid.danplanet.com>> on behalf of Nate Alvin <mypersonalspamfilternc at gmail.com<mailto:mypersonalspamfilternc at gmail.com>>
Sent: 01 May 2017 16:50
To: Discussion of CHIRP
Subject: [chirp_users] BF 888s and UV5R
About 6 weeks ago, i purchased the 2 radios listed in the subject line to test them out for work. I programmed them both to the frequencies assigned to our license. We were assigned a corporate license recently, with different frequencies, vs our stand alone site license which is going to expire. Using the same computer, same "fake prolific" Baofeng cloning cable and the updated daily CHIRP software i was able to reprogram the UV5R, but when i went to read the BD888S i received the error message "radio refused to enter programming mode". Any help would be appreciated. Thanks
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to N.C. at mypersonalspamfilternc at gmail.com<mailto:mypersonalspamfilternc at gmail.com>
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/fee14fc1/attachment-0001.html
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
End of chirp_users Digest, Vol 101, Issue 1
*******************************************
More information about the chirp_users
mailing list