[chirp_users] BF 888s and UV5R

[Nate Alvin]

Tried that and 1-15......

On May 1, 2017 15:33, "Harrison Cooper" <Harrison.Cooper at sandisk.com> wrote:

> I haven’t programmed my 888’s for a while but seems to me you had to put
> them on channel 16 for programming?
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Neil B
> *Sent:* Monday, May 01, 2017 12:53 PM
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Subject:* Re: [chirp_users] BF 888s and UV5R
>
>
>
> ok. just a thought lol.
>
> have you got the latest version of chirp?
>
> have you tried slecting each radio type and do a read attempt.
>
> its the plug sitting home in the radio as some varients the plug dont go
> all the way in, give it a squeeze while trying to read.
>
>
>
> I have a gt-3tp mk3 and until the later update last month, it was only
> programmable using the uv-5r menu. due to the firmware version in the radio.
>
> cant be anything wrong with the lead/usb/windows, as its working on the
> other radio.
>
>
>
>
> ------------------------------
>
> *From:* chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> on behalf of Nate Alvin <
> mypersonalspamfilternc at gmail.com>
> *Sent:* 01 May 2017 18:25
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] BF 888s and UV5R
>
>
>
> Good question, but yes i did change setting from uv5r to the 888
>
>
>
> On May 1, 2017 12:23 PM, "Neil B" <ne.b at hotmail.co.uk> wrote:
>
> may be silly question, but did you change radio type to the bf 888? easy
> common thing to do lol....
>
>
> ------------------------------
>
> *From:* chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> on behalf of Nate Alvin <
> mypersonalspamfilternc at gmail.com>
> *Sent:* 01 May 2017 16:50
> *To:* Discussion of CHIRP
> *Subject:* [chirp_users] BF 888s and UV5R
>
>
>
> About 6 weeks ago, i purchased the 2 radios listed in the subject line to
> test them out for work.  I programmed them both to the frequencies assigned
> to our license.  We were assigned a corporate license recently, with
> different frequencies, vs our stand alone site license which is going to
> expire.  Using the same computer, same "fake prolific" Baofeng cloning
> cable and the updated daily CHIRP software i was able to reprogram the
> UV5R, but when i went to read the BD888S i received the error message
> "radio refused to enter programming mode".  Any help would be appreciated.
> Thanks
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> Western Digital Corporation (and its subsidiaries) E-mail Confidentiality
> Notice & Disclaimer:
> This e-mail and any files transmitted with it may contain confidential or
> legally privileged information of WDC and/or its affiliates, and are
> intended solely for the use of the individual or entity to which they are
> addressed. If you are not the intended recipient, any disclosure, copying,
> distribution or any action taken or omitted to be taken in reliance on it,
> is prohibited. If you have received this e-mail in error, please notify the
> sender immediately and delete the e-mail in its entirety from your system.
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170501/50ad0036/attachment.html