[chirp_users] New user advice please

Jim Unroe rock.unroe at gmail.com
Wed Mar 22 17:28:42 PDT 2017


> I have also buzzed out each line from plug to PCB, and all is good there.

Did you "buzz" between the wires to see if any were shorted?

> However, when I open Chirp and try to download the radio, neither of the
two led's associated with TXD and RXD lights up.

Still sounds like there is a programming cable issue.

> Although this is a UV-5R Plus, do I still use the UV-5R option, or should
I be using the BF-F8HP as the model?

UV-5R: radios with 2 power levels (HIGH/LOW)
BF-F8HP: radios with 2 power levels (HIGH/MID/LOW)

> Oh well, plan B it is then - get 3 wires and one each of 3.5mm and 2.5mm
stereo jacks!

This is what I did.



Jim KC9HI

​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170322/4ca4891c/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CP2102jim.jpg
Type: image/jpeg
Size: 100148 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170322/4ca4891c/attachment-0002.jpg 


More information about the chirp_users mailing list