[chirp_users] Bf-888s

Nate Alvin mypersonalspamfilternc at gmail.com
Wed Mar 22 12:56:41 PDT 2017


It worked.  Thank you!

On Mar 22, 2017 11:19 AM, "Nate Alvin" <mypersonalspamfilternc at gmail.com>
wrote:

> Thank you sir.  I was doing some reading up on that and printed
> instructions to do it later.  Much appreciated !
>
> On Mar 22, 2017 11:17, "Jim Unroe" <rock.unroe at gmail.com> wrote:
>
>> If you are using a programming cable with a Prolific chip with Windows,
>> then the auto installed driver is incompatible. You must downgrade it to
>> v3.2.0.0. There are instructions on miklor.com
>>
>> On Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc at gmail.com>
>> wrote:
>>
>>> I am very new to radios and programming.  I am trying to program a
>>> BF-888S for my business using your software.  The radio was purchased a
>>> week ago along with Baofeng cable.  I get an error message of "radio
>>> refused to enter programming mode".  I have tried all the Baofeng models
>>> listed with similiar results on 2 different laptops. Any help wouldbe
>>> appreciated.  Thanks
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Jim at rock.unroe at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>>> id.danplanet.com
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170322/48e88cfc/attachment-0002.html 


More information about the chirp_users mailing list