[chirp_users] Bf-888s

Jim Unroe rock.unroe at gmail.com
Wed Mar 22 09:17:07 PDT 2017


If you are using a programming cable with a Prolific chip with Windows,
then the auto installed driver is incompatible. You must downgrade it to
v3.2.0.0. There are instructions on miklor.com

On Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc at gmail.com>
wrote:

> I am very new to radios and programming.  I am trying to program a BF-888S
> for my business using your software.  The radio was purchased a week ago
> along with Baofeng cable.  I get an error message of "radio refused to
> enter programming mode".  I have tried all the Baofeng models listed with
> similiar results on 2 different laptops. Any help wouldbe appreciated.
> Thanks
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jim at rock.unroe at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170322/a877fe0c/attachment-0002.html 


More information about the chirp_users mailing list