[chirp_users] Duplex "off" option

Richard B. Booth cqw6rkk at gmail.com
Thu Mar 9 17:14:42 PST 2017


Jim

Thank you very much for the information, it is much appreciated.

cqw6rkk at gmail.com

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Thursday, March 09, 2017 4:54 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Duplex "off" option

On Thu, Mar 9, 2017 at 7:47 PM, Richard B. Booth <cqw6rkk at gmail.com> wrote:
> For the Baofeng UV-5R and variants……..when programming a simplex 
> frequency channel…… will setting the Duplex option in CHIRP to “Off” 
> result in suppressing the TX in simplex operations?

Duplex = (None) = simplex
Duplex = off = RX only/no TX

Here is a link to some guides and examples:
http://www.miklor.com/COM/UV_CHIRP.php#guides

Jim
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Richard Booth at cqw6rkk at gmail.com To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list