[chirp_users] Baofeng UV-5R

Glenn At Home GlennErvin at cableone.net
Tue Mar 7 17:54:33 PST 2017


I do commend you for the go at it on your own.
That is the real HAM spirit.
Glenn
----- Original Message ----- 
From: Dan Grant 
To: 'Discussion of CHIRP' 
Sent: Tuesday, March 07, 2017 7:43 PM
Subject: Re: [chirp_users] Baofeng UV-5R


Thanks very much for the assistance!

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Tom Barton
Sent: March 7, 2017 7:55 PM
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] Baofeng UV-5R

 

Or you could go all in and order a proper cable from Amazon for around 10 bucks

 

On 3/7/2017 7:29 PM, John Wilkerson wrote:

  I just got on Ebay and ordered a CP-2102 chip ($3) and refitted my cables to that.  Cheaper.

   

  On 3/7/2017 19:05, Richard Barnier wrote:

    I have attached two YouTube videos for your review regarding the new Baofeng Chirp cable.  The new cable referred to in the short video has a special chip in the cable that you need to purchase. The YouTube videos will explain everything well.

     

    Baofeng, TYT, Wouxun Programming Cable That Works; AD# 37

    https://www.youtube.com/watch?v=nzkFVtyttKM 

     

    Using CHIRP to Program your Handheld Ham Radios, AD#38

    https://www.youtube.com/watch?v=Mrpqq-xi00g&t=59s 

     

    73

     

    Richard Barnier 

    12868 Mondavi DR.

    Fishers, IN. 46037

    Amateur Radio Callsign: KD9EMM

    CERT, RACES, HCARES

     

     

    From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dan Grant
    Sent: Tuesday, March 7, 2017 3:23 PM
    To: chirp_users at intrepid.danplanet.com
    Subject: [chirp_users] Baofeng UV-5R

     

    I'm VERY new at this so hope this question isn't off base!  I have a new Baofeng UV-5R and have made my own cable to connect to it.  The cable I've made is a DB9F to 3.5mm and 2.5mm plugs.  The USB to serial adapter that I connect to is one that I've used with other things and works fine.  

     

    With the connectors in the radio the display comes up with a solid black dot matrix in the top frequency display and most of the info icons across the top.  When I try to read the radio with CHIRP, I can see some data communication on the lights of the USB/Serial interface and the radio display changes to almost normal but then goes in to transmit mode and everything stops.  I get an error indicating that "An error has occurred - Radio did not respond".  

     

    I'm hoping someone can suggest some things to look at to further troubleshoot this!

     

    Thanks

    Dan Grant

     











_______________________________________________chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Tom at tbarton at hvc.rr.comTo unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 



--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170307/d3bcd154/attachment-0002.html 


More information about the chirp_users mailing list