[chirp_users] Jingtong JT-5988HP

[Aubrey Turner]

In the footer of every email you've received and replied to have been 
the instructions on how to unsubscribe from this list.

Simply responding to each message with "Unsubscribe" will not work, nor 
will it endear you to the many members of the list, none of whom can do 
this for you.

The following section is in the footer of each email you receive.  All 
you have to do is send an email from your listed email address (which is 
shown in the footer) to the unsubscribe address shown in the footer.

    ===========================================
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    <mailto:chirp_users at intrepid.danplanet.com>
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to tbkell at mchsi.com <mailto:tbkell at mchsi.com>
    at tbkell at mchsi.com <mailto:tbkell at mchsi.com>
    To unsubscribe, send an email to
    chirp_users-unsubscribe at intrepid.danplanet.com
    <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>

    ==============================================

So, in your case, simply use 'tkbell at mchsi.com' to send an email to 
'chirp_users-unsubscribe at intrepid.danplanet.com 
<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>' and you're done.


On 03/30/2017 12:13 PM, Mchsi wrote:
>
> Unsubscribe
>
>
> Sent from Tom's iPhone
>
> On Mar 30, 2017, at 6:45 AM, Shon Edwards <sre.1966 at gmail.com 
> <mailto:sre.1966 at gmail.com>> wrote:
>
>> Tried to do this, and tried using our old xp and win 7 machines, as 
>> well, with no result.  Many errors. I think I'm going to have to send 
>> this one back.  Running out of time to get a refund through Amazon.  
>> I appreciate all your help!  73 de K6QT, Shon
>>
>> Shon R. Edwards, MA, AG (Czech Republic)
>> Amateur call:  K6QT
>> 1039 N 2575 W
>> Layton, UT, 84041-7709
>> USA
>> Home phone:  (801) 444-3445
>> E-mail: sre.1966 at gmail.com <mailto:sre.1966 at gmail.com>
>>
>> or
>>
>> Shon Edwards
>> 715 Strawberry Creek Private Rd.
>> Bedford, WY 83112
>> Cell:  (307) 248-2104
>>
>> On Thu, Mar 30, 2017 at 4:04 AM, Shon Edwards <sre.1966 at gmail.com 
>> <mailto:sre.1966 at gmail.com>> wrote:
>>
>>     Thanks for all the help everyone!  I'll give it a try.
>>
>>     Shon R. Edwards, MA, AG (Czech Republic)
>>     Amateur call:  K6QT
>>     1039 N 2575 W
>>     Layton, UT, 84041-7709
>>     USA
>>     Home phone: (801) 444-3445 <tel:%28801%29%20444-3445>
>>     E-mail: sre.1966 at gmail.com <mailto:sre.1966 at gmail.com>
>>
>>     or
>>
>>     Shon Edwards
>>     715 Strawberry Creek Private Rd.
>>     Bedford, WY 83112
>>     Cell: (307) 248-2104 <tel:%28307%29%20248-2104>
>>
>>     On Thu, Mar 30, 2017 at 3:40 AM, Jim Unroe <rock.unroe at gmail.com
>>     <mailto:rock.unroe at gmail.com>> wrote:
>>
>>         On Wed, Mar 29, 2017 at 11:33 PM, Shon Edwards
>>         <sre.1966 at gmail.com <mailto:sre.1966 at gmail.com>> wrote:
>>         > Sorry, I haven't used the site for several years and can't
>>         remember how to
>>         > find whether Chirp works for a specific radio, in this
>>         instance a Jingtong
>>         > JT-5988HP, a 12 W dual band HT, which I have a cable for,
>>         but have talked
>>         > several times with the company and they seem to be telling
>>         me if I don't
>>         > have Windows 7 or earlier, it won't work.
>>         >
>>         > Does anyone have any experience concerning this radio?
>>         >
>>         > Thanks in advance for any help anyone can offer!
>>         >
>>         > 73 de K6QT, Shon
>>
>>         The CHIRP home/wiki page has an extensive list of "Supported
>>         Radio
>>         Models". If you visit the CHIRP website and somehow don't
>>         land on the
>>         home page (chirp.danplanet.com <http://chirp.danplanet.com>),
>>         then click the "Wiki" tab. I want to
>>         say "you can't miss it", but for some reason many people do.
>>
>>         The programming cable itself is hardware and does not care which
>>         operating system you are using. It is the device driver that
>>         interfaces between the USB-to-Serial (UART) chip in the
>>         programming
>>         cable and the operating system that must be compatible with both.
>>
>>         In the case where a programming cable contains a Prolific
>>         type UART,
>>         the device driver that is automatically installed by Windows (for
>>         nearly 10 years) is intentionally incompatible with
>>         counterfeit chips.
>>         If the driver on the CD supplied will work with Windows 7, it
>>         will
>>         work with Windows 10. It just has to be a Prolific device
>>         driver with
>>         a version of v3.3.2.105 or before. But I recommend that you
>>         ignore the
>>         driver CD provided by the vendor and get the Prolific
>>         v3.2.0.0 device
>>         driver from a link on the miklor.com <http://miklor.com>
>>         website. Then follow the guide to
>>         get it installed. This Windows Vista device driver from 2007
>>         will work
>>         with both counterfeit and genuine Prolific UART chips from
>>         Windows
>>         Vista through Windows 10. You need v2.0.2.1 for Windows XP.
>>
>>         Jim
>>         _______________________________________________
>>         chirp_users mailing list
>>         chirp_users at intrepid.danplanet.com
>>         <mailto:chirp_users at intrepid.danplanet.com>
>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>         <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>         This message was sent to Shon, K6QT at sre.1966 at gmail.com
>>         <mailto:sre.1966 at gmail.com>
>>         To unsubscribe, send an email to
>>         chirp_users-unsubscribe at intrepid.danplanet.com
>>         <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com 
>> <mailto:chirp_users at intrepid.danplanet.com>
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to tbkell at mchsi.com <mailto:tbkell at mchsi.com> 
>> at tbkell at mchsi.com <mailto:tbkell at mchsi.com>
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com 
>> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Aubrey Turner at aubrey.c.turner at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170330/c6d32c4e/attachment.html