[chirp_users] (no subject)

[Nigel A. Gunn G8IFF/W8IFF]

Needs a 3.5mm 4 contact jack plug in the mic/ear socket.
Use the outermost ring and sleeve.


> On 27 March 2017 at 15:36 "D.J.J. Ring, Jr." <n1ea at arrl.net> wrote:
> 
> 
> Lee,
> 
> Here's the manual, see if you can find what you need to hook up I offer to
> interface programming and get back to us on what type of cable is needed.
> 
> http://www.yaesu.com/downloadFile.cfm?FileID=635&FileCatID=151&FileName=ft50manual.pdf&FileContentType=application%2Fpdf
> 
> 
> I'd recommend the FTDI type of cables because they don't seem to have
> problems with counterfeit chips in them.
> 
> 73
> 
> David N1EA
> 
> 
> On Mar 27, 2017 12:43 PM, "Lee Houde" <houdatto at gmail.com> wrote:
> 
> Since we are discussing the Yaesu FT-50R, what cable is used with this
> radio? I also have a FT-50R I would like t program.
> 
> On Mon, Mar 27, 2017 at 5:22 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> > On Sun, Mar 26, 2017 at 8:50 PM, Lamar Brown <dlamarbrown at gmail.com>
> > wrote:
> > > Have a Yaesu FT-50R but I see chirp doesn't cover it. But I see it on the
> > > list.  What do I need to get to work for me.
> > >
> > > Lamar
> >
> > Hi Lamar,
> >
> > Are you using the latest CHIRP daily build? The repository shows that
> > the Yaesu FT-50 driver was "overhauled" in January 2016 and a test
> > image was added in February 2016.
> >
> > Using the latest daily build (CHIRP daily-20170324), I am able to
> > select Yaesu FT-50 as the Vendor/Model of radio that I want to
> > download from. The Yaesu FT-50 test image from the CHIRP repository
> > also loaded fine,
> >
> > Jim KC9HI
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Lee Houde at houdatto at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> > id.danplanet.com
> >
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> id.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com