[chirp_users] Password issues and CW/SSB cross-mode issue

[Brad]

Chirp doesn't allow for split modes just frequencies.  if you look at 
your manual page 75 Split Memory Mode. you will see how to program it.


On 3/27/2017 6:51 AM, David A. Behar wrote:
> *Password issues.* I used the "lost password" feature to change my
> password... but I still can't log in with the new password. Any ideas?
>
> *Issue re Yaesu FT-857 and FT-857D.* I'm using a Yaesu FT-857D w/MARS mod,
> so I (successfully) use the FT-857 radio option.
>
> On a few channels I programmed the radio for split mode -- i.e., transmit
> on CW on a carrier about 2 KHz lower than the suppressed LSB carrier for
> the channel I'm receiving. CHIRP handles the frequency split, but I can't
> specify the mode split. Any ideas?
>
> David
> ​ / K7DB​
____________________________________________________________
Warning: Don't Use Probiotics Before You See This
Gundry MD
http://thirdpartyoffers.juno.com/TGL3131/58d905e0c803c5df67c8st04duc