[chirp_users] Bf-888s

[Nate Alvin]

Thank you sir.  I was doing some reading up on that and printed
instructions to do it later.  Much appreciated !

On Mar 22, 2017 11:17, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> If you are using a programming cable with a Prolific chip with Windows,
> then the auto installed driver is incompatible. You must downgrade it to
> v3.2.0.0. There are instructions on miklor.com
>
> On Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc at gmail.com>
> wrote:
>
>> I am very new to radios and programming.  I am trying to program a
>> BF-888S for my business using your software.  The radio was purchased a
>> week ago along with Baofeng cable.  I get an error message of "radio
>> refused to enter programming mode".  I have tried all the Baofeng models
>> listed with similiar results on 2 different laptops. Any help wouldbe
>> appreciated.  Thanks
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jim at rock.unroe at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170322/6bf77c3f/attachment.html