[chirp_users] purchase of a leixon vv-898s - memories

[Neil B]

i did yes. but with a lot of playing, it just had empy mem slots.


i am programming it with the silly software it came with but even when thats written ok to radio and used, when read ok in chirp, no mems.


________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of John LaMartina <JohnLa at usa.net>
Sent: 13 March 2017 18:10
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] purchase of a leixon vv-898s - memories


Did you create an initial template for your radio?
CHIRP supports over 160 various models and requires a template from your radio to know what format too use.
Refer to item (1.1) at http://www.miklor.com/COM/UV_CHIRP.php

CHIRP Programming - Miklor<http://www.miklor.com/COM/UV_CHIRP.php>
www.miklor.com
1.3 : How often should I update CHIRP NEW CHIRP users should always start with CHIRP's Latest Daily Build. 1. If you only have one radio and CHIRP works to your ...




John



http://www.miklor.com



From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Neil B
Sent: Monday, March 13, 2017 1:41 PM
To: Discussion of CHIRP
Subject: [chirp_users] purchase of a leixon vv-898s - memories



Greets again,



i have the above, i reading and writing and playing with it in chirp... chrip writes ok, but the radio shows no programed mems.



i add a few mems to radio manually ok. but then read radio into chirp, but no mems are copied. am i missing something



thanks


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170313/ee6f3239/attachment.html