[chirp_users] Duplex "off" option

[Drew Einhorn]

In my configuration for a BaoFeng F8-HP there are 5 values for the Duplex
setting (None, -, +, Split, Off)

I believe + and - are variations of split.

On Fri, Mar 10, 2017 at 9:22 AM John LaMartina ☀ <JohnLa at usa.net> wrote:

> Duplex None = Tx / Rx on the same freq = Simplex
> Duplex Split = Tx / Rx on split freq = Repeater
> Duplex Off = Rx only = No Transmit
>
> John
> Http://www.miklor.com
>
> On Mar 10, 2017, at 10:53 AM, Doyle Pugmire <sambopugmire at gmail.com>
> wrote:
>
> I have the Baofeng 82-hp.  After reading the conversation below, I set my
> radio on a local police frequency that is programed with “Duplex” set to
> None and tested it to make sure I wouldn’t transmit on it.  I pressed the
> transmit button and the red light on top came on  and the transmit
> indicator on the screen  showed it was transmitting.  From what I have read
> that means it is transmitting.  Wouldn’t the radio transmit if I only
> selected “split”?
>
>
> On Mar 9, 2017, at 9:47 PM, Mike Kartchner <masterwulfe at gmail.com> wrote:
>
> Simple test press the tx an see if your red indicator light come on (if
> not it is not broadcasting)
> but I have noticed in some cases (if before you set it to off) it was at +
> or -, it will not reset to that same + or -, it will go to o in some
> repeater cases that need that + or - setting an the off set factor.
>
> On Thu, Mar 9, 2017 at 4:47 PM, Richard B. Booth <cqw6rkk at gmail.com>
> wrote:
>
> For the Baofeng UV-5R and variants……..when programming a simplex frequency
> channel…… will setting the Duplex option in CHIRP to “Off” result in
> suppressing the TX in simplex operations?
>
>
>
> The reason for asking is as follows: I have several police and fire freqs
> programmed into my radios, i.e., simplex. I want to make sure that even if
> I make a mistake and hit the TX key, I will not TX on these freqs.
>
>
>
> I have in the past programmed these memory channels using split mode and
> setting the TX on a dummy freq well away from the agency RX/TX freq.
>
>
>
> Thanks for any help !!
>
>
>
>
>
>
>
> Notice: This message content and attachments are intended for the sole use
> of the intended recipient(s).
>
> Any use by unauthorized persons is prohibited and may be unlawful.
> Forwarding of this email without the
>
> permission of the sender, original sender, or author is not authorized.
> Forwarding without permission negates
>
> all liability, stated or implied, as applicable to the sender, original
> sender, or author.
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike Kartchner at masterwulfe at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Doyle  at sambopugmire at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> This message was sent to John LaMartina at johnla at usa.net
>
>
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Drew Einhorn at drew.einhorn at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com

-- 
I don't remember, I don't recall
I got no memory of anything at all
    -- Peter Gabriel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170310/f5785d5c/attachment.html