[chirp_users] Duplex "off" option

[Richard B. Booth]

For the Baofeng UV-5R and variants....when programming a simplex frequency
channel.. will setting the Duplex option in CHIRP to "Off" result in
suppressing the TX in simplex operations?

 

The reason for asking is as follows: I have several police and fire freqs
programmed into my radios, i.e., simplex. I want to make sure that even if I
make a mistake and hit the TX key, I will not TX on these freqs.

 

I have in the past programmed these memory channels using split mode and
setting the TX on a dummy freq well away from the agency RX/TX freq.

 

Thanks for any help !!

 

 

 

Notice: This message content and attachments are intended for the sole use
of the intended recipient(s).

Any use by unauthorized persons is prohibited and may be unlawful.
Forwarding of this email without the

permission of the sender, original sender, or author is not authorized.
Forwarding without permission negates

all liability, stated or implied, as applicable to the sender, original
sender, or author.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170309/ec85a0d0/attachment.html