[chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????

Erick Reinstedt reinstedts at gmail.com
Mon Jul 31 10:52:53 PDT 2017


I have never taken the time to thank the people who make CHIRP possible, 
maintain it, answer my questions, etc. and this seemed like a good time 
to say that you are appreciated, that you have blessed me, you have been 
patient with my ignorance, you have given me a product that I couldn't 
have afforded otherwise, and you have made possible for me something I 
couldn't have done on my own. Thank you very much. You are wonderful!

Erick Reinstedt, K6YEC

On 7/31/2017 10:29 AM, Mark H. Harris wrote:
> The CHIRP software is a great tool, easy to use, and very reliable; 
>  thanks to those who develop and maintain CHIRP !
>
>
>
> On Mon, Jul 31, 2017 at 9:17 AM, John Kemker <kemkerj3 at gmail.com 
> <mailto:kemkerj3 at gmail.com>> wrote:
>
>     Y'know, I have heard more than 1 ham claim that chirp is
>     "dangerous" and/or junk, but when pressed, they all either heard
>     it from someone else or they expect the same sort of experience
>     you get when you pay for an integrated solution, like RT Systems. 
>     Chirp works. You have to pay attention to the details like proper
>     cable selection, but it works. It's not an out- of- the box
>     solution. It's more in the spirit of ham radio.
>
>     On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar at gmail.com
>     <mailto:amnon.zohar at gmail.com>> wrote:
>
>         The cheap cable are not a real problem as long as you use the
>         older driver. Works fine for me
>
>         בתאריך 31 ביול' 2017 8:10,‏ "Tom Hayward" <tom at tomh.us
>         <mailto:tom at tomh.us>> כתב:
>
>             On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell
>             <larry.lovell76 at gmail.com
>             <mailto:larry.lovell76 at gmail.com>> wrote:
>             >
>             > I love Chirp and have used it on at least three
>             different radios.  My greatest problem is finding a cable
>             that really works.  Some of the USB to serial cables are
>             defective clones and have cost me a bundle trying to
>             either find or build a good one.  Never had an issue with
>             Chirp. Thank you for the software.
>
>             There are two ways to go with this:
>
>             - Buy one good FTDI to DE9 cable and then buy only serial
>             cables for each radio
>
>             - Or switch to Linux where there are no driver issues
>
>             Tom KD7LXL
>             _______________________________________________
>             chirp_users mailing list
>             chirp_users at intrepid.danplanet.com
>             <mailto:chirp_users at intrepid.danplanet.com>
>             http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>             <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>             This message was sent to amnon at amnon.zohar at gmail.com
>             <mailto:amnon.zohar at gmail.com>
>             To unsubscribe, send an email to
>             chirp_users-unsubscribe at intrepid.danplanet.com
>             <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
>
>         _______________________________________________
>         chirp_users mailing list
>         chirp_users at intrepid.danplanet.com
>         <mailto:chirp_users at intrepid.danplanet.com>
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>         <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>         This message was sent to W5NNH at kemkerj3 at gmail.com
>         <mailto:kemkerj3 at gmail.com>
>         To unsubscribe, send an email to
>         chirp_users-unsubscribe at intrepid.danplanet.com
>         <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>     This message was sent to marcus at harrismh777 at gmail.com
>     <mailto:harrismh777 at gmail.com>
>     To unsubscribe, send an email to
>     chirp_users-unsubscribe at intrepid.danplanet.com
>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
>
>
> -- 
>
> Kind regards,
> Mark H. Harris
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Erick at reinstedts at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170731/af50c81a/attachment-0002.html 


More information about the chirp_users mailing list