[chirp_users] BF-F8HP

John LaMartina JohnLa at usa.net
Sat Jul 15 11:02:49 PDT 2017


As Jim mentioned, The driver for the counterfeit trip, the one you need is Prolific 3.2.0.0

This can be found at
http://www.miklor.com/COM/UV_Drivers.php 

Sent via iPhone8


> On Jul 15, 2017, at 1:26 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
>> On Sat, Jul 15, 2017 at 12:40 PM, David Booth <dvdbooth8 at gmail.com> wrote:
>> Hi,
>> I am trying to program my BF-F8HP. In using CHIRP I get to Download
>> from the radio.  When I try to do this I can't find any commport
>> number that works. Please help!  Thanks, David
> 
> Before a communication port can be detected, there must be a complete
> and working connection between the radio and computer. You didn't say
> which operating system you are using so I will assume Windows.
> 
> With Windows, you should be able to access Device Manager to determine
> exactly which COM port was assigned to your programming cable.
> 
> Do you have the Baofeng Tech PC03 programming cable with FTDI chip? If
> not, then your programming cable most likely has a counterfeit copy of
> a Prolific chip. The device driver that is automatically installed
> when a Prolific chip is detected is intentionally incompatible with
> counterfeit Prolific chips.
> 
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John LaMartina at johnla at usa.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list