[chirp_users] Lexien VV-898/ Jetstream JT270 Channel Names.

Brian Dickman brian.maybe at gmail.com
Sun Jul 9 14:06:28 PDT 2017


It is a known issue. http://chirp.danplanet.com/issues/4069

I would say it's in progress, but I just haven't worked on it in a while.
Fixing this driver for the 1.07+ firmware is on my summer todo list. Watch
that issue for updates and beta modules to test.

--
Brian AF7MD

On Sat, Jul 8, 2017 at 8:41 PM Gary Chambers via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> Question:
>
> When programming my Lexien VV-898 with chirp, the alpha-numeric memory
> channel names get assigned to the wrong channels, always three channels
> off, channels 1,2 and 3 are assigned a generic name of A001, A002, A003 or
> B001, B002, B003 depending on which memory bank is selected. Although, the
> Ch 1 programmed name is assigned to channel 4, the channel 4 freq, offset,
> tones are correct. The radio uses the Jetstream jt270 software. Both banks
> share the same symptoms. Is there something simple I'm missing or a work
> around???
>
> Gary Chambers KG5TQE
> Sent from my iPhone
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Brian Dickman at brian.maybe at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170709/1f2a4c19/attachment-0002.html 


More information about the chirp_users mailing list