[chirp_users] chirp_users Digest, Vol 103, Issue 29
Eric Chopin
Mon Jul 31 20:48:21 PDT 2017
Re: YOUR SOFTWARE IS JUNK
Hey, ALL these individual that have the audacity to criticize need to take
a step back and try to connect with their 1 brain cell... Maybe they can do
better!!?? ... if not go and buy some dedicated programming software @ $100
a pop!! ...otherwise just zip it!!
I have used CHIRP for many years, programmed MANY radios of different
manufacture and always had my queries answered and questions solved by the
team
I think ALL the guy's that contribute to the development of this SUPERB
piece of software are doing a sterling job and I wish I had half of the
programming knowledge that these guy/girls have.
Keep up the good work CHIRP teams ...just ignore the negative individuals.
73's
Eric
On Mon, Jul 31, 2017 at 12:00 PM, <
chirp_users-request at intrepid.danplanet.com> wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (George Hale Jr.)
> 2. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Jimmy Ray Tyner III)
> 3. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Baji Panchumarti)
> 4. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Edwin W Luke)
> 5. Re: Fwd: Re: Icom IC-80AD (David Ranch)
> 6. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Steven Craven)
> 7. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (mats.g.roos at gmail.com)
> 8. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Ron Hawkins)
> 9. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Jim Unroe)
> 10. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (D.J.J. Ring, Jr.)
> 11. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (D.J.J. Ring, Jr.)
> 12. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (George Hale Jr.)
> 13. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Rodger Woods)
> 14. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Benton)
> 15. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (D.J.J. Ring, Jr.)
> 16. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (kc6iih at aol.com)
> 17. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Benton)
> 18. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (jim)
> 19. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Chance Fulton)
> 20. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Joe Puma)
> 21. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Alan Hill)
> 22. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Martin Howells)
> 23. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Jardy)
> 24. PowerWorx (David J. J. Ring, Jr.)
> 25. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Larry Lovell)
> 26. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Tom Hayward)
> 27. Uniden 996P2 (Dave Archer)
> 28. Re: Uniden 996P2 (Jardy)
> 29. Re: Uniden 996P2 (Tom Hayward)
> 30. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Amnon Zohar)
> 31. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (John Kemker)
> 32. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Mark H. Harris)
> 33. Re: YOUR SOFTWARE IS JUNK //////////???????????????
> (Erick Reinstedt)
> 34. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Skip)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 30 Jul 2017 13:03:18 -0600
> From: "George Hale Jr." <ghalejr at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAJfKeYBHxbYrWDpnoAKCBFz-MbbU9XfmRMkLgDJBpBEDEqZ9ww@
> mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Every time I have used Chirp, any issues were from my learning curve.
> That's on me, not anything from the program that could be done better. I
> challenge you to find a better program, with better support at any cost.
>
> You will get further in life, if you learn to channel your emotions to
> solving problems, and not blaming the rest of the world.
>
> Cheers. George
>
> On Sun, Jul 30, 2017 at 12:48 PM, Jon Raether <raether.jon at gmail.com>
> wrote:
>
> > As a newbie, I can tell you all I am very thankful for your work! I just
> > programmed my first radio last weekend in my first radio as I begin my
> > journey to get my tivcket, I am now able to listen to others! I look
> > forward to getting my "ticket" and being able to use the radio!
> >
> > I found the software easy to use and the directions simple. Worked the
> > first time I used it!
> >
> >
> > >From a newbie, thanks for all of your hard work!
> >
> >
> >
> > Jon
> >
> >
> > -----Original Message-----
> > From: chirp_users-bounces at intrepid.danplanet.com
> > [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Randy
> > Elliott
> > Sent: Sunday, July 30, 2017 1:24 PM
> > To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> > Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> >
> > Wow, those are very harsh words towards a group of fine people that
> > "VOLUNTEER" their time to bring us this FREE software.
> > My suggestion to you, would be, stop using CHIRP and just go away.
> >
> > Randy
> > VE3JPU at me.com
> >
> >
> > > On Jul 30, 2017, at 2:07 PM, Tom Hayward <tom at tomh.us> wrote:
> > >
> > >> On Sun, Jul 30, 2017 at 10:47 AM, mike Heightchew <mikeheight at att.net
> >
> > wrote:
> > >>
> > >> YOUR SOFTWARE IS JUNK //////////???????????????
> > >> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > >> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > >> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > >> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > >> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > >> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> > >
> > > I know your 4 key works because you used a few times in this message.
> > > I'm going to guess you never tried using it in the com port field. If
> > > you had, you wouldn't have trued for 5 days--or was it 4 days--you
> > > weren't clear on that.
> > >
> > > Tom KD7LXL
> > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Skid at ve3jpu at me.com
> > > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Jon Raether at raether.jon at gmail.com
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to ghalejr at gmail.com at ghalejr at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/11a27601/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Sun, 30 Jul 2017 15:05:24 -0400
> From: Jimmy Ray Tyner III <novothule at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CABv6=x6Y1w23TA4=6MbZtRYLptyEnMK2KPLN8ETvBonGaZqTKg at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I need to redownload Chirp, what's the best site to do so from?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/803ffe54/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Sun, 30 Jul 2017 15:08:04 -0400
> From: Baji Panchumarti <ohiobaji at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAM=xYAcf-+LbZ4oV_r+ximO=Z-Hyh2s6pB=G4Owj21Dv1Vfe5Q at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> http://chirp.danplanet.com/projects/chirp/wiki/Download
>
>
> ~baji.
>
> . _ . _ .
>
>
>
>
> ? ?
> On Sun, Jul 30, 2017 at 3:05 PM, Jimmy Ray Tyner III <novothule at gmail.com>
> wrote:
>
>
> I need to redownload Chirp, what's the best site to do so from?
> >
> > __
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/20bed198/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Sun, 30 Jul 2017 12:28:59 -0700
> From: Edwin W Luke <salty4568 at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,
> "chirp_users at intrepid.danplanet.com"
> <chirp_users at intrepid.danplanet.com>
> Message-ID: <yp79iy768358wm3nowriqmit.1501442939068 at email.android.com>
> Content-Type: text/plain; charset="utf-8"
>
> Works just fine for me! If you do not like chirp, write your own!
>
> Skip KL7IXX
>
>
> On July 30, 2017, at 10:49 AM, mike Heightchew <mikeheight at att.net> wrote:
>
> YOUR SOFTWARE IS JUNK //////////???????????????
>
> YOUR ?SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
>
> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE?
>
> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD?
>
> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND?
>
> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK?
>
> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND?
>
>
>
>
> ?Virus-free. www.avast.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/dbf5759b/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Sun, 30 Jul 2017 12:39:39 -0700
> From: David Ranch <chirp at trinnet.net>
> Subject: Re: [chirp_users] Fwd: Re: Icom IC-80AD
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <499e8d0b-fdd8-aefb-4b64-3b716dbfe1d4 at trinnet.net>
> Content-Type: text/plain; charset="windows-1252"
>
>
> I can also confirm that the IC-80AD doesn't show up in the Chirp: Radio
> --> "Download from Radio" list (using the 07/30/17 Linux daily). I just
> tried the auto-detect option but when I tell Chirp to download from the
> radio (correct serial port, FTDI based cable that's worked on in the
> past, etc), I'm only getting the following regardless if the radio is
> sitting in clone mode, I try to initiate clone from the radio then tell
> Chirp to start, etc.
>
> --
> ERROR: --- Exception Dialog: Out of sync with radio ---
> ERROR: Traceback (most recent call last):
> File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/ui/clone.py",
> line 175, in run
> cs.radio_class = detect.DETECT_FUNCTIONS[vendor](cs.port)
> File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py",
> line 76, in detect_icom_radio
> result = _detect_icom_radio(ser)
> File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py",
> line 43, in _detect_icom_radio
> md = icf.get_model_data(ser)
> File
> "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line
> 142, in get_model_data
> frames = stream.get_frames()
> File
> "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line
> 134, in get_frames
> return self._process_frames()
> File
> "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line
> 88, in _process_frames
> raise errors.InvalidDataError("Out of sync with radio")
> InvalidDataError: Out of sync with radio
> --
>
> I would assume that once I tell Chirp to start downloading, it would sit
> there for a while, waiting for me to hit the PTT button on the radio to
> start sending it's data. What seems to be happening is that Chirp is
> not waiting and almost instantly errors out. This used to work though
> I'll admit it's been some time since I've programed this radio.
>
> --
> Centos 6.8
> GTK 2.24.23
> PyGTK 2.24.0
> Python 2.6.6
> --
>
> --David
> KI6ZHD
>
>
> On 07/29/2017 09:08 AM, D.J.J. Ring, Jr. wrote:
> >
> > Wayne,
> >
> > You're exactly right.
> >
> > ICOM IC-80AD is right on the top of ICOM list of supported radios and
> > it's not listed.
> >
> > However, there is DETECT position in CHIRP.
> >
> > Have you tried this?
> >
> > 73
> >
> > DR
> >
> > On Fri, Jul 28, 2017, 14:23 Wayne Roberts <mrgadgetfl at gmail.com
> > <mailto:mrgadgetfl at gmail.com>> wrote:
> >
> >
> >
> >
> > -------- Forwarded Message --------
> > Subject: Re: [chirp_users] Icom IC-80AD
> > Date: Wed, 26 Jul 2017 17:05:18 -0500
> > From: Wayne Roberts <mrgadgetfl at gmail.com>
> > <mailto:mrgadgetfl at gmail.com>
> > To: David J. J. Ring, Jr. <n1ea at arrl.net> <mailto:
> n1ea at arrl.net>
> >
> >
> >
> > CHIRP daily-20170714, Windows 10 (64).
> >
> > Wayne, K4GQS
> >
> >
> > On 7/26/2017 4:59 PM, David J. J. Ring, Jr. wrote:
> >> Under About Chirp what version is it and what operating system
> >> are you using.
> >>
> >> The version to use is the DAILY BUILD.
> >>
> >> 73
> >> David
> >> N1EA
> >>
> >> On July 26, 2017 3:26:38 PM EDT, Wayne Roberts
> >> <mrgadgetfl at gmail.com> <mailto:mrgadgetfl at gmail.com> wrote:
> >>
> >> 73
> >>
> >> DR
> >> N1EA
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> <mailto:chirp_users at intrepid.danplanet.com>
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> >> This message was sent to Wayne atmrgadgetfl at gmail.com <mailto:
> mrgadgetfl at gmail.com>
> >> To unsubscribe, send an email tochirp_users-unsubscribe@
> intrepid.danplanet.com
> >> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> > _______________________________________________ chirp_users
> > mailing list chirp_users at intrepid.danplanet.com
> > <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This
> > message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> > <mailto:n1ea at arrl.net> To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to David Ranch at chirp at trinnet.net
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/bd1b28cd/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Sun, 30 Jul 2017 15:54:00 -0400
> From: "Steven Craven" <kinnettsound at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
> Message-ID: <45E709FF07FB46CDBFF3C748D58A4B2E at andrea1a05658b>
> Content-Type: text/plain; charset="utf-8"
>
> As a newbie, I can tell you all I am very thankful for all of the work
> that has been done here.
> I just programmed my first radio about 6 or 8 months and all the problems
> that I've had
> was my learning curve. Had it working the 4th or 5th time I went back thru
> everything.
> Besides, it's free, these people done this just to help others, If you
> don't like it maybe
> you just need to uninstall it, leave everyone here alone and stop being
> such an asshole.
>
>
> S.W. Craven KD9lXD
> "Youth and exuberance can never compete
> with maturity and treachery".
> ----- Original Message -----
> From: mike Heightchew
> To: chirp_users at intrepid.danplanet.com
> Sent: Sunday, July 30, 2017 1:47 PM
> Subject: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
>
>
> YOUR SOFTWARE IS JUNK //////////???????????????
> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE
> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD
> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
>
>
>
>
>
> Virus-free. www.avast.com
>
>
>
> ------------------------------------------------------------
> ------------------
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to JRC at kinnettsound at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/3a1e9fcb/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Sun, 30 Jul 2017 14:48:03 -0500
> From: "mats.g.roos at gmail.com" <mats.g.roos at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <877CBC2B-89A4-41B3-A65E-FEE35E69C950 at gmail.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Guy, don't waste time, though or energy on people like this, he can't even
> spell.
>
> Thx Team chirp for the software work you guys do.
>
> Mats
>
>
>
> > On Jul 30, 2017, at 2:28 PM, Edwin W Luke <salty4568 at gmail.com> wrote:
> >
> > Works just fine for me! If you do not like chirp, write your own!
> >
> > Skip KL7IXX
> >
> >
> > On July 30, 2017, at 10:49 AM, mike Heightchew <mikeheight at att.net>
> wrote:
> >
> >
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> > Virus-free. www.avast.com
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Mats at mats.g.roos at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/3d4baee9/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Sun, 30 Jul 2017 20:28:05 +0000
> From: Ron Hawkins <ron_hawkins at outlook.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <BN1PR01MB280E0D503533581EF12F59E91BD0 at BN1PR01MB280.prod.
> exchangelabs.com>
>
> Content-Type: text/plain; charset="utf-8"
>
> Agreed. Somebody need to take his nap. Cranky.
>
> Sent from Ron's iPhone
>
> On Jul 30, 2017, at 14:53, Mark Schmal <mark at schmal.us<mailto:mark@
> schmal.us>> wrote:
>
> Wow! What an asshole
>
> On Sun, Jul 30, 2017 at 10:47 AM, mike Heightchew <mikeheight at att.net
> <mailto:mikeheight at att.net>> wrote:
> YOUR SOFTWARE IS JUNK //////////???????????????
> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR SOFTWARE
> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD
> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
>
>
>
> [https://ipmcdn.avast.com/images/icons/icon-envelope-
> tick-round-orange-animated-no-repeat-v1.gif]<https://www.
> avast.com/sig-email?utm_medium=email&utm_source=link&
> utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free.
> www.avast.com<https://www.avast.com/sig-email?utm_
> medium=email&utm_source=link&utm_campaign=sig-email&utm_
> content=webmail&utm_term=link>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com<mailto:chirp_
> users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mark Schmal at mark at schmal.us<mailto:mark@
> schmal.us>
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com<mailto:chirp_users-unsubscribe@
> intrepid.danplanet.com>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com<mailto:chirp_
> users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ron Hawkins at ron_hawkins at outlook.com<mailto:
> ron_hawkins at outlook.com>
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com<mailto:chirp_users-unsubscribe@
> intrepid.danplanet.com>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/594f0b1e/attachment-0001.html
>
> ------------------------------
>
> Message: 9
> Date: Sun, 30 Jul 2017 16:29:43 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADnO8U5hZ2+t2UDzPz5sMsPqUAiXdUgHq9J3Hscoc
> 4uzKp0QFg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Sun, Jul 30, 2017 at 1:47 PM, mike Heightchew <mikeheight at att.net>
> wrote:
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
>
> Hi Mike,
>
> Apparently you either aren't using CHIRP or aren't using the CHIRP I
> am familiar with. When I started using CHIRP back in 2012 it supported
> Windows serial ports COM1 through COM16. More than most any other
> factory software that I has experience with at the time. Not long
> after that CHIRP was updated and Windows version now has support for
> COM1 through COM256.
>
> But CHIRP will only show you the COM ports that are currently
> available on your computer. It is your job to have a configured and
> properly working COM port on your computer.
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 10
> Date: Sun, 30 Jul 2017 16:29:32 -0400
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADO5RbiBMDpWT8NHd8eJzThv=sLiJOpnHCKQB=BJRKspa+WJUg@
> mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Mike,
>
> I personally replied to your first message.
>
> There were also three additional replies.
>
> To your second message there were 17 replies.
>
> People have tried to help you, I personally am using COM 5 so what you are
> saying is not true.
>
> I also asked you if you were using a USB to Serial converter, and you did
> not answer me.
>
> It's obvious, but perhaps you need someone to tell you: What you are
> saying is totally false.
>
> I'm saying that because people who start believing what is false, really
> become confused and it's a frightening trip that sometimes is one from
> which they never return to sanity.
>
> I hope you find your way. We're here to help about CHIRP but there are
> other places you can seek aid for the other problems which seem obvious at
> least to me.
>
> Best wishes,
>
> David N1EA
>
>
>
>
> On Sun, Jul 30, 2017 at 1:47 PM, mike Heightchew <mikeheight at att.net>
> wrote:
>
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <#m_3323090813800453229_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/c66f1bc6/attachment-0001.html
>
> ------------------------------
>
> Message: 11
> Date: Sun, 30 Jul 2017 16:58:16 -0400
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: mike Heightchew <mikeheight at att.net>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADO5RbjW8bbpwDphwyWrQEL1PHdN5NLWsVYycrzRaqOiWn4TxA at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello Mike,
>
> Thanks for the off-list direct reply (copied below). Others including
> myself are trying to help you but we don't get responses from you to help
> fix the problem that you are having. A screen print of your Device Manager
> showing the COM ports that are being recognized would help. You can upload
> such a screen shot anonymously to http://imgur.com. Just post the link
> they will give you.
>
> As you have just been told, your COM port is not being seen.
>
> Can you see your comport under Device Manager?
>
> What you wrote to me doesn't even make sense.
>
> i am going to spent my time with software that will not works
> >
>
> CHIRP works fine. It supports the COM port that you have.
>
> You haven't answered any question that has been asked of you, but you
> complain.
>
> If you want to answer some questions we can find what the problem is that
> you are having.
>
> Thousands of people use this software every day.
>
> A few have problems, but usually it is just an operator error.
>
> If you would like to write to the list calmly, we could help you find the
> error you have.
>
> Often it is a cable that is defective. Some cables do not fit in the
> radios.
>
> Often - with Windows - the user has purchased a cable with a counterfeit
> electronic chip in it they are based on the Prolific PL-2303 USB chip.
> Windows detects the chip and updates the driver, and the driver now updated
> won't work with the fake chip in the USB to serial port converter.
>
> There are suitable converters - they are based on the FTDI chip.
>
> Here is a USB to Serial Port converter that is FTDI based.
>
> https://www.amazon.com/dp/B004ZMYTYC/ref=wl_it_dp_o_pC_
> nS_ttl?_encoding=UTF8&colid=37GZ3VAPMP84W&coliid=I3NO9S4ALAH06C&psc=1
>
> You've asked for help, people have responded to you, but you fail to
> respond to questions.
>
> Can you show us a screen shot of the Port being recognized by Device
> Manger?
>
> If it's recognized by Device Manager, it WILL be seen in CHIRP.
>
> Wishing you well,
>
> David N1EA
>
>
>
>
>
>
> On Sun, Jul 30, 2017 at 4:37 PM, mike Heightchew <mikeheight at att.net>
> wrote:
>
> > yes i check everything that is ok i am going to spent my time with
> > software that will not works
> > so have a nice day it would good idea for you make this software easter
> > to use
> > and i am tec i fix 3 or 4 a day been doing it for 25 year so i know what
> > i am doing here this software is not non computer people to use
> >
> > bye
> >
> >
> > On Sunday, July 30, 2017 1:30 PM, "D.J.J. Ring, Jr." <n1ea at arrl.net>
> > wrote:
> >
> >
> > Mike,
> >
> > I personally replied to your first message.
> >
> > There were also three additional replies.
> >
> > To your second message there were 17 replies.
> >
> > People have tried to help you, I personally am using COM 5 so what you
> are
> > saying is not true.
> >
> > I also asked you if you were using a USB to Serial converter, and you did
> > not answer me.
> >
> > It's obvious, but perhaps you need someone to tell you: What you are
> > saying is totally false.
> >
> > I'm saying that because people who start believing what is false, really
> > become confused and it's a frightening trip that sometimes is one from
> > which they never return to sanity.
> >
> > I hope you find your way. We're here to help about CHIRP but there are
> > other places you can seek aid for the other problems which seem obvious
> at
> > least to me.
> >
> > Best wishes,
> >
> > David N1EA
> >
> >
> >
> >
> > On Sun, Jul 30, 2017 at 1:47 PM, mike Heightchew <mikeheight at att.net>
> > wrote:
> >
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <https://mg.mail.yahoo.com/neo/launch?.partner=sbc&.rand=
> 8eobleunonnc5#m_3323090813800453229_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > ______________________________ _________________
> > chirp_users mailing list
> > chirp_users at intrepid. danplanet.com <chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/ mailman/listinfo/chirp_users
> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com <chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> >
> >
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/247e8ad7/attachment-0001.html
>
> ------------------------------
>
> Message: 12
> Date: Sun, 30 Jul 2017 14:53:37 -0600
> From: "George Hale Jr." <ghalejr at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAJfKeYDH7a4VGq3iKp35e63H=+gg-JnTSWPuYjt6gZLBFq1TMw at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> "Thx Team chirp for the software work you guys do."
>
>
> Agreed, we do not thank them enough. I wish I knew more to help them out.
>
> ? I would be lost if it were not for the work the team does. Thanks!
>
> George
>
> On Sun, Jul 30, 2017 at 1:48 PM, mats.g.roos at gmail.com <
> mats.g.roos at gmail.com> wrote:
>
> > Guy, don't waste time, though or energy on people like this, he can't
> even
> > spell.
> >
> > Thx Team chirp for the software work you guys do.
> >
> > Mats
> >
> >
> >
> > On Jul 30, 2017, at 2:28 PM, Edwin W Luke <salty4568 at gmail.com> wrote:
> >
> > Works just fine for me! If you do not like chirp, write your own!
> >
> > Skip KL7IXX
> >
> >
> > On July 30, 2017, at 10:49 AM, mike Heightchew <mikeheight at att.net>
> wrote:
> >
> >
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <#m_5484013428275251952_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Mats at mats.g.roos at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to ghalejr at gmail.com at ghalejr at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/ca589803/attachment-0001.html
>
> ------------------------------
>
> Message: 13
> Date: Sun, 30 Jul 2017 16:12:35 -0500
> From: Rodger Woods <trainingranger at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CA+bZB+ofbrLxEVKeLhPEtDsgk9H4pbg0-kunnPgPLhi49cj2AA at mail.gmail.
> com>
> Content-Type: text/plain; charset="utf-8"
>
> I use it all the time, works great.... Never had an issue or a question
> not answered within a reasonable amount of time.
> In fact just finished reprogramming two radios today....
>
> Rodger
> KE5OIR
>
> On Jul 30, 2017 12:49, "mike Heightchew" <mikeheight at att.net> wrote:
>
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <#m_7197678719321050185_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Rodger Woods at trainingranger at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/ba4905a9/attachment-0001.html
>
> ------------------------------
>
> Message: 14
> Date: Sun, 30 Jul 2017 14:15:48 -0700
> From: Benton <benton at siletzbay.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <9e15f1126d25d1337b35586e05b355d9 at aracnet.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> On 2017-07-30 12:48, mats.g.roos at gmail.com wrote:
> > Guy, don't waste time, though or energy on people like this, he can't
> > even spell.
>
> Intentionally or not, it came across as, and had the effect of, a troll.
> Time to stop feeding the troll.
>
> Benton 30jul17
> --
> KF7QLP
> benton at siletzbay.com
>
>
> ------------------------------
>
> Message: 15
> Date: Sun, 30 Jul 2017 17:22:12 -0400
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADO5RbjYKgmrBaGzZhoTGHhoZQ5Pq71omfN5L2pUpNWUbViWSg at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Mike,
>
> Let's start helping you.
>
> Tell us:
>
>
> 1. What operating system and version you are using. CHIRP works on all
> platforms. I'm using Linux but it works on Mac and Windows as well.
> 2. Tell us what radio you are trying to program? If it's more then one,
> pick one so we can get that working first, the others will follow.
> 3. Tell us what kind of cable you are using. There are some problems
> with counterfeit cables - it's not a CHIRP problem but there are Chinese
> made adapters that use fake chips using the Prolific chip. The FTDI
> chip
> based cables work fine. See http://chirp.danplanet.com
> /projects/chirp/wiki/CableGuide
> <http://chirp.danplanet.com/projects/chirp/wiki/CableGuide> There is
> also a work-around for the automatic driver update that Windows does
> that
> will allow your counterfeit cable to work by rolling back the driver.
>
> Let's start there and see if we can add you to the happy CHIRP user base.
>
> Best wishes,
>
> David N1EA
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/1d5c87d5/attachment-0001.html
>
> ------------------------------
>
> Message: 16
> Date: Sun, 30 Jul 2017 17:46:03 -0400
> From: kc6iih at aol.com
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: ghalejr at gmail.com, chirp_users at intrepid.danplanet.com
> Message-ID: <15d95769783-54c1-30227 at webprd-m60.mail.aol.com>
> Content-Type: text/plain; charset="utf-8"
>
> Chirp is great software.
> It's apparent that the guy having problems has no computer knowledge.
>
> Jock Soutar KC6IIH
> Sent via Samsung Galaxy S7
> on AT&T 4G LTE Smartphone
>
> On Sunday, July 30, 2017 George Hale Jr. <ghalejr at gmail.com> wrote:
>
> "Thx Team chirp for the software work you guys do."
>
>
> Agreed, we do not thank them enough. I wish I knew more to help them out.
>
> ? I would be lost if it were not for the work the team does. ? Thanks!
>
> George
>
>
> On Sun, Jul 30, 2017 at 1:48 PM, mats.g.roos at gmail.com <
> mats.g.roos at gmail.com> wrote:
>
> Guy, don't waste time, though or energy on people like this, he can't even
> spell.?
>
>
> Thx Team chirp for the software work you guys do.?
>
>
> Mats
>
>
>
>
> On Jul 30, 2017, at 2:28 PM, Edwin W Luke <salty4568 at gmail.com> wrote:
>
> Works just fine for me! If you do not like chirp, write your own!
>
> Skip KL7IXX
>
>
>
> On July 30, 2017, at 10:49 AM, mike Heightchew <mikeheight at att.net> wrote:
>
>
> YOUR SOFTWARE IS JUNK //////////???????????????
>
> YOUR ?SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
>
> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE?
>
> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD?
>
> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND?
>
> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK?
>
> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND?
>
>
>
>
> ?Virus-free. www.avast.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mats at mats.g.roos at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to ghalejr at gmail.com at ghalejr at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jock at kc6iih at aol.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/c4f20c68/attachment-0001.html
>
> ------------------------------
>
> Message: 17
> Date: Sun, 30 Jul 2017 15:07:45 -0700
> From: Benton <benton at siletzbay.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <58b51934b47f3bdbd4ef1b2d31195e50 at aracnet.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> On 2017-07-30 14:22, D.J.J. Ring, Jr. wrote:
> > ...it's not a CHIRP problem but there are Chinese made adapters that
> > use fake chips using the Prolific chip. The FTDI chip based cables
> > work fine.
>
> The FTDI USB/RS-232 chips have also been counterfeited, tho' seemingly
> not in such great numbers.
>
> Remember when FTDI released a driver that detected the fake parts and
> bricked 'em? After (I suspect a severe scolding for) using MS to
> distribute the driver, they released a follow-up that, like Prolific's,
> merely declines to work with counterfeit parts. (Least that's my
> recollection.)
>
> https://www.techrepublic.com/article/ftdi-abuses-windows-
> update-pushing-driver-that-breaks-counterfeit-chips/
>
> http://hackaday.com/2016/02/01/ftdi-drivers-break-fake-chips-again/
>
> Benton 30jul17
> --
> KF7QLP
> benton at siletzbay.com
>
>
> ------------------------------
>
> Message: 18
> Date: Sun, 30 Jul 2017 15:38:02 -0700
> From: jim <jim at bifrost.online>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <26342890.R3TbsKfnVq at mimir>
> Content-Type: text/plain; charset="iso-8859-1"
>
> +-------------------+ .:\:\:/:/:.
> | PLEASE DO NOT | :.:\:\:/:/:.:
> | FEED THE TROLLS | :=.' - - '.=:
> | | '=(\ 9 9 /)='
> | Thank you, | ( (_) )
> | Management | /`-vvv-'\
> +-------------------+ / \
> | | @@@ / /|,,,,,|\ \
> | | @@@ /_// /^\ \\_\
> @x@@x@ | | |/ WW( ( ) )WW
> \||||/ | | \| __\,,\ /,,/__
> \||/ | | | (______Y______)
> /\/\/\/\/\/\/\/\//\/\\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> =============================================
> =====================
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/0db00bf0/attachment-0001.html
>
> ------------------------------
>
> Message: 19
> Date: Sun, 30 Jul 2017 18:58:12 -0400
> From: Chance Fulton <chance.fulton at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAKVivJ+mg__61R6j0yo0mkqG2tzcPjAztrHLMxZAZ
> O4XaWFNDA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Yeah, I run my radio on Com 8 and 11, I think it's time for you to pay for
> some better software. Bye felicia.
>
> On Jul 30, 2017 1:48 PM, "mike Heightchew" <mikeheight at att.net> wrote:
>
> > YOUR SOFTWARE IS JUNK //////////???????????????
> > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> > SOFTWARE
> > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> > WORLD
> > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <#m_5464340191791397035_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Chance at chance.fulton at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/50b03fdd/attachment-0001.html
>
> ------------------------------
>
> Message: 20
> Date: Sun, 30 Jul 2017 19:09:02 -0400
> From: Joe Puma <theprogramllc at yahoo.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <C2AFBCCC-A552-463D-8D44-99B36A150D94 at yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Lol @ bye Felicia. I wonder how many CHIRP users are familiar with this
> find reference from pop culture. :D
>
>
>
>
> Sent from my iPhone
>
> > On Jul 30, 2017, at 6:58 PM, Chance Fulton <chance.fulton at gmail.com>
> wrote:
> >
> > Yeah, I run my radio on Com 8 and 11, I think it's time for you to pay
> for some better software. Bye felicia.
> >
> >> On Jul 30, 2017 1:48 PM, "mike Heightchew" <mikeheight at att.net> wrote:
> >> YOUR SOFTWARE IS JUNK //////////???????????????
> >> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> >> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> SOFTWARE
> >> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> WORLD
> >> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> >> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> >> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >>
> >>
> >>
> >> Virus-free. www.avast.com
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to Chance at chance.fulton at gmail.com
> >> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Joe Puma at theprogramllc at yahoo.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/427027cc/attachment-0001.html
>
> ------------------------------
>
> Message: 21
> Date: Sun, 30 Jul 2017 16:52:29 -0700
> From: Alan Hill <alan.r.hill at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAPaNg_UOyfoVCieF+eyO2TePMzda-ZXAaRH1-
> fRcEEcQXjeSkg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Best to ignore and diminish the thread.
>
> On Jul 30, 2017 1:29 PM, "Ron Hawkins" <ron_hawkins at outlook.com> wrote:
>
> > Agreed. Somebody need to take his nap. Cranky.
> >
> > Sent from Ron's iPhone
> >
> > On Jul 30, 2017, at 14:53, Mark Schmal <mark at schmal.us> wrote:
> >
> > Wow! What an asshole
> >
> > On Sun, Jul 30, 2017 at 10:47 AM, mike Heightchew <mikeheight at att.net>
> > wrote:
> >
> >> YOUR SOFTWARE IS JUNK //////////???????????????
> >> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE
> >> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR
> >> SOFTWARE
> >> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE
> >> WORLD
> >> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND
> >> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK
> >> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND
> >>
> >>
> >>
> >>
> >> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> >> www.avast.com
> >> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> >> <#m_-4560209806214791473_m_2938698598668396506_DAB4FAD8-
> 2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to Mark Schmal at mark at schmal.us
> >> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> >> id.danplanet.com
> >>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Ron Hawkins at ron_hawkins at outlook.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Silver Fox at alan.r.hill at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/1160c260/attachment-0001.html
>
> ------------------------------
>
> Message: 22
> Date: Mon, 31 Jul 2017 11:48:40 +1000
> From: "Martin Howells" <martin at vk2qh.net>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <00f301d3099f$23cfd730$6b6f8590$@vk2qh.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Aww, but it can be fun and entertaining to feed trolls!!
>
>
>
> No, seriously though, I agree that CHIRP is a great bit of software that I
> am so very thankful for. Have managed to programme 2 of my radios with it
> (wish it would support the 3rd rig, but alas not yet.)
>
>
>
> My sincere thanks to the team for their work and dedication.
>
>
>
> 73's
>
>
>
> Martin, VK2QH.
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of jim
> Sent: Monday, 31 July 2017 08:38
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
>
>
>
> +-------------------+ .:\:\:/:/:.
> | PLEASE DO NOT | :.:\:\:/:/:.:
> | FEED THE TROLLS | :=.' - - '.=:
> | | '=(\ 9 9 /)='
> | Thank you, | ( (_) )
> | Management | /`-vvv-'\
> +-------------------+ / \
> | | @@@ / /|,,,,,|\ \
> | | @@@ /_// /^\ \\_\
> @x@@x@ | | |/ WW( ( ) )WW
> \||||/ | | \| __\,,\ /,,/__
> \||/ | | | (______Y______)
> /\/\/\/\/\/\/\/\//\/\\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> ==================================================================
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/d17f2924/attachment-0001.html
>
> ------------------------------
>
> Message: 23
> Date: Sun, 30 Jul 2017 19:17:28 -0700
> From: Jardy <jardy72 at yahoo.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <91D37750-5A0C-4603-8848-923D4E981ECD at yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Just gotta know what bridge to look under!
>
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal
> Translator.
>
>
> > On Jul 30, 2017, at 18:48, Martin Howells <martin at vk2qh.net> wrote:
> >
> > Aww, but it can be fun and entertaining to feed trolls!!
> >
> > No, seriously though, I agree that CHIRP is a great bit of software that
> I am so very thankful for. Have managed to programme 2 of my radios with it
> (wish it would support the 3rd rig, but alas not yet?)
> >
> > My sincere thanks to the team for their work and dedication.
> >
> > 73?s
> >
> > Martin, VK2QH.
> >
> > From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of jim
> > Sent: Monday, 31 July 2017 08:38
> > To: Discussion of CHIRP
> > Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> >
> > +-------------------+ .:\:\:/:/:.
> > | PLEASE DO NOT | :.:\:\:/:/:.:
> > | FEED THE TROLLS | :=.' - - '.=:
> > | | '=(\ 9 9 /)='
> > | Thank you, | ( (_) )
> > | Management | /`-vvv-'\
> > +-------------------+ / \
> > | | @@@ / /|,,,,,|\ \
> > | | @@@ /_// /^\ \\_\
> > @x@@x@ | | |/ WW( ( ) )WW
> > \||||/ | | \| __\,,\ /,,/__
> > \||/ | | | (______Y______)
> > /\/\/\/\/\/\/\/\//\/\\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> > ==================================================================
> >
> > Virus-free. www.avast.com
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Jardy at jardy72 at yahoo.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/c94ed028/attachment-0001.html
>
> ------------------------------
>
> Message: 24
> Date: Mon, 31 Jul 2017 00:03:51 -0400
> From: "David J. J. Ring, Jr." <n1ea at arrl.net>
> Subject: [chirp_users] PowerWorx
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <EEEB33B1-98EE-49B7-8DAA-E0A28D40AF00 at arrl.net>
> Content-Type: text/plain; charset="utf-8"
>
> Does anyone have a very good relationship with the management of
> POWERWERX.COM?
>
> I have tried to speak to them about CHIRP but they are under some
> prejudice that CHIRP bricks radios so that they are unrecoverable.
>
> If someone knows the owner, I'd like to lobby for acceptance of this fine
> software with the object that they could persuade some companies to share
> programming data with the developers of CHIRP.
> 73
>
> DR
> N1EA
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/d164f44b/attachment-0001.html
>
> ------------------------------
>
> Message: 25
> Date: Sun, 30 Jul 2017 22:46:34 -0600
> From: Larry Lovell <larry.lovell76 at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Jardy <jardy72 at yahoo.com>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAJRzjdtxUViYKcBcJpp6o1oRmVn+DcvC8yJc0cWdOMYfEB-cTQ at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I love Chirp and have used it on at least three different radios. My
> greatest problem is finding a cable that really works. Some of the USB to
> serial cables are defective clones and have cost me a bundle trying to
> either find or build a good one. Never had an issue with Chirp. Thank you
> for the software.
>
> On Sun, Jul 30, 2017 at 8:17 PM, Jardy via chirp_users <
> chirp_users at intrepid.danplanet.com> wrote:
>
> > Just gotta know what bridge to look under!
> >
> > Jardy Dawson WA7JRD
> > Message sent through sub space hailing frequencies using the Universal
> > Translator.
> >
> >
> > On Jul 30, 2017, at 18:48, Martin Howells <martin at vk2qh.net> wrote:
> >
> > Aww, but it can be fun and entertaining to feed trolls!!
> >
> >
> >
> > No, seriously though, I agree that CHIRP is a great bit of software that
> I
> > am so very thankful for. Have managed to programme 2 of my radios with it
> > (wish it would support the 3rd rig, but alas not yet?)
> >
> >
> >
> > My sincere thanks to the team for their work and dedication.
> >
> >
> >
> > 73?s
> >
> >
> >
> > Martin, VK2QH.
> >
> >
> >
> > *From:* chirp_users-bounces at intrepid.danplanet.com [
> > mailto:chirp_users-bounces at intrepid.danplanet.com
> > <chirp_users-bounces at intrepid.danplanet.com>] *On Behalf Of *jim
> > *Sent:* Monday, 31 July 2017 08:38
> > *To:* Discussion of CHIRP
> > *Subject:* Re: [chirp_users] YOUR SOFTWARE IS JUNK
> > //////////???????????????
> >
> >
> >
> > +-------------------+ .:\:\:/:/:.
> >
> > | PLEASE DO NOT | :.:\:\:/:/:.:
> >
> > | FEED THE TROLLS | :=.' - - '.=:
> >
> > | | '=(\ 9 9 /)='
> >
> > | Thank you, | ( (_) )
> >
> > | Management | /`-vvv-'\
> >
> > +-------------------+ / \
> >
> > | | @@@ / /|,,,,,|\ \
> >
> > | | @@@ /_// /^\ \\_\
> >
> > @x@@x@ | | |/ WW( ( ) )WW
> >
> > \||||/ | | \| __\,,\ /,,/__
> >
> > \||/ | | | (______Y______)
> >
> > /\/\/\/\/\/\/\/\//\/\\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> >
> > ==================================================================
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=emailclient>
> > <#m_-4366298837189029319_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Jardy at jardy72 at yahoo.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Larry Lovell at larry.lovell76 at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
>
>
>
> --
> Larry Lovell
> 73's N7RGW
> Work: 208-557-4500
> http://qrvtronics.com
> Home: 208-356-7749
> http://mormon.org/me/4V53/LarryLovell/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/84985d41/attachment-0001.html
>
> ------------------------------
>
> Message: 26
> Date: Sun, 30 Jul 2017 22:07:22 -0700
> From: Tom Hayward <tom at tomh.us>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Cc: Jardy <jardy72 at yahoo.com>
> Message-ID:
> <CAFXO5Z11gN+Htj4WQ7T9o2n2X0qDrDB773t2Cw0An
> 4KjqCv+Qw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76 at gmail.com>
> wrote:
> >
> > I love Chirp and have used it on at least three different radios. My
> greatest problem is finding a cable that really works. Some of the USB to
> serial cables are defective clones and have cost me a bundle trying to
> either find or build a good one. Never had an issue with Chirp. Thank you
> for the software.
>
> There are two ways to go with this:
>
> - Buy one good FTDI to DE9 cable and then buy only serial cables for each
> radio
>
> - Or switch to Linux where there are no driver issues
>
> Tom KD7LXL
>
>
> ------------------------------
>
> Message: 27
> Date: Sun, 30 Jul 2017 22:25:24 -0700
> From: Dave Archer <davarc at premier1.net>
> Subject: [chirp_users] Uniden 996P2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <EC23D1B6-1481-4E33-BC04-E5FD0929660B at premier1.net>
> Content-Type: text/plain; charset=us-ascii
>
> well it work the Uniden 996P2?
>
>
> ------------------------------
>
> Message: 28
> Date: Sun, 30 Jul 2017 22:30:28 -0700
> From: Jardy <jardy72 at yahoo.com>
> Subject: Re: [chirp_users] Uniden 996P2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <381495F1-12F4-4239-8D89-77A55BDB26D9 at yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Look at the home page for supported radios.
>
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal
> Translator.
>
>
> > On Jul 30, 2017, at 22:25, Dave Archer <davarc at premier1.net> wrote:
> >
> > well it work the Uniden 996P2?
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Jardy at jardy72 at yahoo.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170730/08099251/attachment-0001.html
>
> ------------------------------
>
> Message: 29
> Date: Sun, 30 Jul 2017 23:02:51 -0700
> From: Tom Hayward <tom at tomh.us>
> Subject: Re: [chirp_users] Uniden 996P2
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAFXO5Z0ckyEkRvc+JyY6xnKjhb3-1FEHo2VnJd12U2dq=Q4VXw at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Sun, Jul 30, 2017 at 10:25 PM, Dave Archer <davarc at premier1.net> wrote:
> > well it work the Uniden 996P2?
>
> No, and Chirp does not even have a generic mechanism to handle
> talkgroups and trunked sites, so it's not likely to be added any time
> soon.
>
> Tom KD7LXL
>
>
> ------------------------------
>
> Message: 30
> Date: Mon, 31 Jul 2017 14:28:45 +0300
> From: Amnon Zohar <amnon.zohar at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAN5HzcTe7ZCazMOYn=K=Ropfv+JCCVwnsNLNpvcQLaQZfivA9A at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> The cheap cable are not a real problem as long as you use the older driver.
> Works fine for me
>
> ?????? 31 ????' 2017 8:10,? "Tom Hayward" <tom at tomh.us> ???:
>
> On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76 at gmail.com>
> wrote:
> >
> > I love Chirp and have used it on at least three different radios. My
> greatest problem is finding a cable that really works. Some of the USB to
> serial cables are defective clones and have cost me a bundle trying to
> either find or build a good one. Never had an issue with Chirp. Thank you
> for the software.
>
> There are two ways to go with this:
>
> - Buy one good FTDI to DE9 cable and then buy only serial cables for each
> radio
>
> - Or switch to Linux where there are no driver issues
>
> Tom KD7LXL
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/ea0b940e/attachment-0001.html
>
> ------------------------------
>
> Message: 31
> Date: Mon, 31 Jul 2017 10:17:01 -0400
> From: John Kemker <kemkerj3 at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CA+r6kYSbzEjb2rZqungO=kvPTAUSqxBLd-Dvt=H8Figm8ZTF-Q@
> mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Y'know, I have heard more than 1 ham claim that chirp is "dangerous" and/or
> junk, but when pressed, they all either heard it from someone else or they
> expect the same sort of experience you get when you pay for an integrated
> solution, like RT Systems. Chirp works. You have to pay attention to the
> details like proper cable selection, but it works. It's not an out- of- the
> box solution. It's more in the spirit of ham radio.
>
> On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar at gmail.com> wrote:
>
> > The cheap cable are not a real problem as long as you use the older
> > driver. Works fine for me
> >
> > ?????? 31 ????' 2017 8:10,? "Tom Hayward" <tom at tomh.us> ???:
> >
> > On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76 at gmail.com>
> > wrote:
> > >
> > > I love Chirp and have used it on at least three different radios. My
> > greatest problem is finding a cable that really works. Some of the USB
> to
> > serial cables are defective clones and have cost me a bundle trying to
> > either find or build a good one. Never had an issue with Chirp. Thank
> you
> > for the software.
> >
> > There are two ways to go with this:
> >
> > - Buy one good FTDI to DE9 cable and then buy only serial cables for each
> > radio
> >
> > - Or switch to Linux where there are no driver issues
> >
> > Tom KD7LXL
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to amnon at amnon.zohar at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> > id.danplanet.com
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to W5NNH at kemkerj3 at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/6a1865a7/attachment-0001.html
>
> ------------------------------
>
> Message: 32
> Date: Mon, 31 Jul 2017 12:29:05 -0500
> From: "Mark H. Harris" <harrismh777 at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAFq9LpmGw=_hBba_5W_P4rDvhy1W8VCcigUOoL1_
> K1wYA7rxJQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> The CHIRP software is a great tool, easy to use, and very reliable; thanks
> to those who develop and maintain CHIRP !
>
>
>
> On Mon, Jul 31, 2017 at 9:17 AM, John Kemker <kemkerj3 at gmail.com> wrote:
>
> > Y'know, I have heard more than 1 ham claim that chirp is "dangerous"
> > and/or junk, but when pressed, they all either heard it from someone else
> > or they expect the same sort of experience you get when you pay for an
> > integrated solution, like RT Systems. Chirp works. You have to pay
> > attention to the details like proper cable selection, but it works. It's
> > not an out- of- the box solution. It's more in the spirit of ham radio.
> >
> > On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar at gmail.com> wrote:
> >
> >> The cheap cable are not a real problem as long as you use the older
> >> driver. Works fine for me
> >>
> >> ?????? 31 ????' 2017 8:10,? "Tom Hayward" <tom at tomh.us> ???:
> >>
> >> On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76 at gmail.com
> >
> >> wrote:
> >> >
> >> > I love Chirp and have used it on at least three different radios. My
> >> greatest problem is finding a cable that really works. Some of the USB
> to
> >> serial cables are defective clones and have cost me a bundle trying to
> >> either find or build a good one. Never had an issue with Chirp. Thank
> you
> >> for the software.
> >>
> >> There are two ways to go with this:
> >>
> >> - Buy one good FTDI to DE9 cable and then buy only serial cables for
> each
> >> radio
> >>
> >> - Or switch to Linux where there are no driver issues
> >>
> >> Tom KD7LXL
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to amnon at amnon.zohar at gmail.com
> >> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> >> id.danplanet.com
> >>
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> This message was sent to W5NNH at kemkerj3 at gmail.com
> >> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> >> id.danplanet.com
> >>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to marcus at harrismh777 at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> > intrepid.danplanet.com
> >
>
>
>
> --
>
> Kind regards,
> Mark H. Harris
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/289fda8c/attachment-0001.html
>
> ------------------------------
>
> Message: 33
> Date: Mon, 31 Jul 2017 10:52:53 -0700
> From: Erick Reinstedt <reinstedts at gmail.com>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <f4571955-99b6-f5b9-08d7-8712371e89b3 at gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I have never taken the time to thank the people who make CHIRP possible,
> maintain it, answer my questions, etc. and this seemed like a good time
> to say that you are appreciated, that you have blessed me, you have been
> patient with my ignorance, you have given me a product that I couldn't
> have afforded otherwise, and you have made possible for me something I
> couldn't have done on my own. Thank you very much. You are wonderful!
>
> Erick Reinstedt, K6YEC
>
> On 7/31/2017 10:29 AM, Mark H. Harris wrote:
> > The CHIRP software is a great tool, easy to use, and very reliable;
> > thanks to those who develop and maintain CHIRP !
> >
> >
> >
> > On Mon, Jul 31, 2017 at 9:17 AM, John Kemker <kemkerj3 at gmail.com
> > <mailto:kemkerj3 at gmail.com>> wrote:
> >
> > Y'know, I have heard more than 1 ham claim that chirp is
> > "dangerous" and/or junk, but when pressed, they all either heard
> > it from someone else or they expect the same sort of experience
> > you get when you pay for an integrated solution, like RT Systems.
> > Chirp works. You have to pay attention to the details like proper
> > cable selection, but it works. It's not an out- of- the box
> > solution. It's more in the spirit of ham radio.
> >
> > On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar at gmail.com
> > <mailto:amnon.zohar at gmail.com>> wrote:
> >
> > The cheap cable are not a real problem as long as you use the
> > older driver. Works fine for me
> >
> > ?????? 31 ????' 2017 8:10,? "Tom Hayward" <tom at tomh.us
> > <mailto:tom at tomh.us>> ???:
> >
> > On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell
> > <larry.lovell76 at gmail.com
> > <mailto:larry.lovell76 at gmail.com>> wrote:
> > >
> > > I love Chirp and have used it on at least three
> > different radios. My greatest problem is finding a cable
> > that really works. Some of the USB to serial cables are
> > defective clones and have cost me a bundle trying to
> > either find or build a good one. Never had an issue with
> > Chirp. Thank you for the software.
> >
> > There are two ways to go with this:
> >
> > - Buy one good FTDI to DE9 cable and then buy only serial
> > cables for each radio
> >
> > - Or switch to Linux where there are no driver issues
> >
> > Tom KD7LXL
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to amnon at amnon.zohar at gmail.com
> > <mailto:amnon.zohar at gmail.com>
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to W5NNH at kemkerj3 at gmail.com
> > <mailto:kemkerj3 at gmail.com>
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to marcus at harrismh777 at gmail.com
> > <mailto:harrismh777 at gmail.com>
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> > <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> >
> >
> >
> > --
> >
> > Kind regards,
> > Mark H. Harris
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Erick at reinstedts at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/af50c81a/attachment-0001.html
>
> ------------------------------
>
> Message: 34
> Date: Mon, 31 Jul 2017 12:31:36 -0600
> From: "Skip" <rockyvista at windstream.net>
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK
> //////////???????????????
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
> Message-ID: <838C965CC3FA431D8FC6F7BC45679852 at Opti790>
> Content-Type: text/plain; charset="utf-8"
>
> Ditto!!
> KS5KIP
>
> From: Erick Reinstedt
> Sent: Monday, July 31, 2017 11:52 AM
> To: chirp_users at intrepid.danplanet.com
> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
>
> I have never taken the time to thank the people who make CHIRP possible,
> maintain it, answer my questions, etc. and this seemed like a good time to
> say that you are appreciated, that you have blessed me, you have been
> patient with my ignorance, you have given me a product that I couldn't have
> afforded otherwise, and you have made possible for me something I couldn't
> have done on my own. Thank you very much. You are wonderful!
>
> Erick Reinstedt, K6YEC
>
> On 7/31/2017 10:29 AM, Mark H. Harris wrote:
>
> The CHIRP software is a great tool, easy to use, and very reliable;
> thanks to those who develop and maintain CHIRP !
>
>
>
> On Mon, Jul 31, 2017 at 9:17 AM, John Kemker <kemkerj3 at gmail.com> wrote:
>
> Y'know, I have heard more than 1 ham claim that chirp is "dangerous"
> and/or junk, but when pressed, they all either heard it from someone else
> or they expect the same sort of experience you get when you pay for an
> integrated solution, like RT Systems. Chirp works. You have to pay
> attention to the details like proper cable selection, but it works. It's
> not an out- of- the box solution. It's more in the spirit of ham radio.
>
> On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar at gmail.com> wrote:
>
> The cheap cable are not a real problem as long as you use the older
> driver. Works fine for me
>
> ?????? 31 ????' 2017 8:10,? "Tom Hayward" <tom at tomh.us> ???:
>
> On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <
> larry.lovell76 at gmail.com> wrote:
> >
> > I love Chirp and have used it on at least three different
> radios. My greatest problem is finding a cable that really works. Some of
> the USB to serial cables are defective clones and have cost me a bundle
> trying to either find or build a good one. Never had an issue with Chirp.
> Thank you for the software.
>
>
> There are two ways to go with this:
>
> - Buy one good FTDI to DE9 cable and then buy only serial cables
> for each radio
>
> - Or switch to Linux where there are no driver issues
>
> Tom KD7LXL
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> This message was sent to amnon at amnon.zohar at gmail.com
>
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> This message was sent to W5NNH at kemkerj3 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to marcus at harrismh777 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
>
>
>
> --
>
>
> Kind regards,
> Mark H. Harris
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Erick at reinstedts at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
>
> ------------------------------------------------------------
> --------------------
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Skip at rockyvista at windstream.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/
> attachments/20170731/4f020e64/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 103, Issue 29
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170731/595a6ac7/attachment.html
More information about the chirp_users
mailing list