[chirp_users] Serial Cable not Found on Max

[John Laiosa]

Peter,
That worked!  Thanks for your help.  Now the application crashes after
upload, but  I am getting closer.

John N1BSO

John Laiosa

On Tue, Jun 27, 2017 at 7:44 AM, Peter J. McClosky <pmcclosky at earthlink.net>
wrote:

> Click on the USB section and fid the cable. The not the name and model
> number, do a search for that and down load it, and make sure that it
> installs. restart you computer and you should be able to program you radio.
>
> Good luck,
> Peter
> -----
> Peter J. McClosky, N7IY
> Eugene, Oregon
> pmcclosky at earthlink.net
> n7iy at arrl.net
> http://home.earthlink.net/~pmcclosky/
>
> On Jun 26, 2017, at 4:58 PM, John Laiosa <jlaiosa at gmail.com> wrote:
>
> So I went into System Information and I can see "USB Serial Controller"
> under Hardware/USB.  Now what driver do I need so Chirp will see the cable.
>
> Thanks for the help.
>
> John
> On Mon, Jun 26, 2017 at 8:47 AM Peter J. McClosky <pmcclosky at earthlink.net>
> wrote:
>
>> Hello all,
>>
>> Having programed about 150 of these radios (for my club, and most on a
>> Mac), and using a multitude of different cables, I have never found a bad
>> cable.
>>
>> What I have found is you need to get the right driver.
>>
>> On a Mac, this is done by plugging cable in, going to the “About this
>> Mac”, getting a “System report”, and looking for your cable in the “USB”
>> section of the “Hardware” section.
>>
>> Download the driver.
>>
>> Unless the Mac is really old, this should work.
>>
>> Peter, N7IY
>> -----
>> Peter J. McClosky, N7IY
>> Eugene, Oregon
>> pmcclosky at earthlink.net
>> n7iy at arrl.net
>> http://home.earthlink.net/~pmcclosky/
>>
>> On Jun 26, 2017, at 2:08 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>>
>>  DI'm very curious how you came to that conclusion based on Jim's comment.
>>
>> While Jim's suggestion will work fine, what I'm going to recommend
>> (again) is the opposite. As described in the link in my last message,
>> uninstall Apple's FTDI driver since it conflicts with FTDI's FTDI
>> driver. The goal is to leave only FTDI's FTDI driver on your system,
>> no conflicts.
>>
>> Tom KD7LXL
>>
>>
>> Agreed. One way or the other, there should only be one FTDI driver
>> installed.
>>
>> Jim
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>> This message was sent to Peter at pmcclosky at earthlink.net
>>
>>
>> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to JohnL at jlaiosa at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe@
>> intrepid.danplanet.com
>
> --
> Sent from John's iPhone
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Peter at pmcclosky at earthlink.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to JohnL at jlaiosa at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170704/96b54858/attachment.html