[chirp_users] searching old messages

Jason Stevens fleagalbaum at hotmail.com
Thu Jan 26 21:11:26 PST 2017


I have trimmed the cable and I can see air between the body of the radio and the inside corner of the cable.


Jason



On 26/01/17 08:13 PM, Walt Childson wrote:
I have a gt3tp, and my cable would not plug in deeply enough and hence I got the same problem. So I took a razor blade to the inside corner of my cable. When I plugged in afterwards there was a distinctive snap. Worked like a charm afterwards.

Walt
N6STM
73

On Jan 26, 2017 6:11 PM, "Jason Stevens" <fleagalbaum at hotmail.com<mailto:fleagalbaum at hotmail.com>> wrote:
Hi all, I am new to the radio stuff.   I would like to search the
messages for an answer.   I Bought a Baofeng GT-3TP for my own personal
radio to use on a licensed frequency that I use for volunteer work.  I
am trying to program it with chirp latest nightly on Debian Linux using
the BF-F8HP like it says in the wiki but no luck, I get a radio didn't
respond error with a Prolific cable and an incorrect Model selected
error with a ftdi cable.  Is there any suggestions to fix this?  It does
work using the UV-5R driver but then I only have 2 power modes.  My
friend bough the same Gt-3TP radio and had a UV-5R previously and he is
having the same problem.

Thanks in advance.

Jason
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Walt Childson at wchildson at gmail.com<mailto:wchildson at gmail.com>
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>




_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jason Stevens at fleagalbaum at hotmail.com<mailto:fleagalbaum at hotmail.com>
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170127/6e39ba69/attachment-0002.html 


More information about the chirp_users mailing list