[chirp_users] WLN radios

Patrick Brown n7fhb at wickenburg.net
Mon Feb 27 16:50:18 PST 2017


I have done all below except hitting return


  I use windows i think it is 7 on that computer

  i will try again  when try to save it, it deletes all the DTCS when i 
up load to the radio it deletes the DTCS

  i do test it to another radio

  thank you

   Patrick Brown  YCSRT 3213

       N7FHB Wilhoit
      145.350 Wildflower
      SYCSRT TEAM Manager
      http://ycsrt.org

T.E.A.M = Together Everyone Accomplishes More

On 2/27/2017 5:29 PM, Jim Unroe wrote:
> On Mon, Feb 27, 2017 at 9:14 AM, Patrick Brown <n7fhb at wickenburg.net> wrote:
>> I have been trying to program 2 WLN radios supported by chirp and it
>> don't seem to up load DCS tones and when saving the file it does not
>> save the DCS tones ?
> Patrick,
>
> I downloaded from my radio. I then changed one of the channels to use
> a DCS (aka DTCS) code. I uploaded to radio and then downloaded from
> the radio to verify that the channel was updated with the code. It
> was.
>
> I then save the tab that was edited to have a DCS code and loaded it
> back into CHIRP to verify that the channel was updated with the code.
> It was.
>
> Are you using Windows? If yes, after you choose a value from the drop
> down list, you must either press the [Enter] key or click onto another
> cell to actually make the choice permanent. If you don't do this extra
> step, the selected value will not "stick". This is not needed for
> CHIRP running under the Linux or Mac OS X operating systems.
>
> To verify that you have correctly selected a value, you can click the
> [Refresh] button at the top of the spreadsheet style memory editor. If
> the chosen value remains, it was permanently selected.
>
> Another way to do this would be to highlight the memory row and either
> click the [Properties] button at the top of the spreadsheet style
> memory editor or right-click the memory row and choose "Properties"
> from the menu that appears. Make the changes in the Memory Properties
> menu and then click the [OK] button to make the changes permanent.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Pat at n7fhb at wickenburg.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>




More information about the chirp_users mailing list