[chirp_users] Yaseu 7800

Brian O' Martin ke7azd1 at gmail.com
Sat Feb 18 15:42:54 PST 2017


I have the 7800 not the 7800r does that make a differance?

On Sat, Feb 18, 2017 at 6:44 AM, Jardy Dawson via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> CHIRP worked fine on my 7800, and I have a cable that goes from the 6 way
> din to USB.
>
> Jardy Dawson
> WA7JRD Ham Radio
>
> Message relayed from secret Hillary Clinton server, located in the
> basement of her house.  OOPS, you aren't supposed to know that!
>
> On Feb 18, 2017, at 05:33, Tom Consodine via chirp_users <
> chirp_users at intrepid.danplanet.com> wrote:
>
>
> I think you need a different cable. It sounds like you are trying to
> feed USB to the radio. The radio doesn't have USB.
> I use a USB to RS-232 serial dongle then the radio cable converts
> RS-232 to TTL.
>
> Also be aware that Chirp does not work properly with the FT-7800R.
> Some of the tone modes that the radio has are not supported in Chirp.
>
> Tom ND5Y
> On 02/17/2017 11:30 PM, Brian O' Martin wrote:
>
> ok, Im not really good with computers. I have a yaseu ft 7800 and a hp
>
> laptop with no serial ports. I have a ps2 male to ps2 male cable and a
>
> ps2 to usb adapter. I had to run a virtual com port program and then
>
> chirp. I followed the on screen directions for my radio. I on the
>
> radio it says tx for 2 or 3 seconds and then error. the pc says
>
> cloneing, then error occured, unabe to communicate with radio. failed
>
> to read header (0)
>
>
> Im thinking its my com port. before i used the virtual port i look
>
> under device manager and there is no section + ports.  oh yea Im using
>
> windows xp sp3 media version.
>
>
> Please help.
>
>
> 73's
>
> Ke7azd
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Brian at ke7azd1 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170218/2efaad27/attachment-0002.html 


More information about the chirp_users mailing list