[chirp_users] Yaseu 7800
nd5y at yahoo.com
Sat Feb 18 05:33:57 PST 2017
I think you need a different cable. It sounds like you are trying to
feed USB to the radio. The radio doesn't have USB.
I use a USB to RS-232 serial dongle then the radio cable converts
RS-232 to TTL.
Also be aware that Chirp does not work properly with the FT-7800R.
Some of the tone modes that the radio has are not supported in Chirp.
On 02/17/2017 11:30 PM, Brian O' Martin wrote:
> ok, Im not really good with computers. I have a yaseu ft 7800 and a hp
> laptop with no serial ports. I have a ps2 male to ps2 male cable and a
> ps2 to usb adapter. I had to run a virtual com port program and then
> chirp. I followed the on screen directions for my radio. I on the
> radio it says tx for 2 or 3 seconds and then error. the pc says
> cloneing, then error occured, unabe to communicate with radio. failed
> to read header (0)
> Im thinking its my com port. before i used the virtual port i look
> under device manager and there is no section + ports. oh yea Im using
> windows xp sp3 media version.
> Please help.
More information about the chirp_users