[chirp_users] Baofeng Radio Help

bernard.dowley at sky.com bernard.dowley at sky.com
Sat Feb 4 13:54:03 PST 2017


Hi
I suspect you have done this, but just in case. First enter the frequency of your repeater. Then set the return frequency in the  offset column. You can usually enter this as 145.625 or whatever. Later the programme will show as an offset figure, not the frequency that you entered. You need to tell the program that this is either a '-' or '+' offset. You will need to set the relevant CTCSS  tones etc.  for that repeater, whatever they are. If you have done all this then I have no idea what the problem is.

Bernie2E0NCI


 

    On Saturday, 4 February 2017, 21:10, George Cossey K5GOC <george.k5goc at gmail.com> wrote:
 

   The emergency response community has changed to narrow band.  Some are digital.
  
 On 2/4/2017 2:37 PM, Bill Gabbard wrote:
  
  Donie, Had same happen here on my UV5R & finally found out that they either changed frequencies or went digital (P25, NAM, Etc. Tones).  If they went Digital but stayed on same freq. all I'd hear was garbled audio................Bill 
 ----- Original Message -----  From: Donie Allen via chirp_users  To: chirp_users at intrepid.danplanet.com  Sent: Saturday, February 04, 2017 2:41 PM Subject: [chirp_users] Baofeng Radio Help 
    I have used CHIRP to program Baofeng UV5R with my local First Responder frequencies. However, I still cannot pick them up. Does anyone have any advice on what I am doing wrong or suggestions for me to try?     _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to BillG226 at wcgabbard1 at windstream.net
 To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
 
  
 _______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to George at george.k5goc at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 
 
 
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bernard Dowley at bernard.dowley at sky.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170204/80ede2fc/attachment-0002.html 


More information about the chirp_users mailing list