[chirp_users] Has anyone successfully programmed a Kenwood TM-D700 with Chirp?

Mike Rees mikekd7cvj at gmail.com
Sat Feb 4 07:11:48 PST 2017


Rich,
 I have.  You connect to the RS-232 port.  You might need a gender changer
if using a straight serial cable. If dealing with USB get a Kenwood
specific cable with a FTDI chipset. The cable that RT Systems sells with
there software works perfect all the time.

On Sat, Feb 4, 2017 at 8:00 AM, Rich Holtman <rich.holtman at gmail.com> wrote:

> 1) Has anyone successfully programmed a Kenwood TM-D700 with Chirp?
>
> 2) What cable did you use?
>
> 3) Does that cable connect to the 9-pin RS-232 on the radio, or the 6-pin
> mini DIN connector?
>
> Thank you,
>
> Rich Holtman
> KD9ANU
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike at mikekd7cvj at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



-- 
Mike
kd7cvj
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170204/2fab758a/attachment-0002.html 


More information about the chirp_users mailing list