[chirp_users] FT 2900

[Tom Barton]

2 - 2900's - one modded and one not - cable works fine on the un-modded 
one. As a matter of fact - I have several types of cables for different 
radios, so yes, I think that's the driver I'm using.


On 2/23/2017 7:55 PM, Jardy Dawson via chirp_users wrote:
> Check device manager to see if your cable is a Prolific. If it is, 
> roll your driver back to 3.2.0.0 and see if that works.
>
> Jardy Dawson
> WA7JRD Ham Radio
>
> Message relayed from secret Hillary Clinton server, located in the 
> basement of her house.  OOPS, you aren't supposed to know that!
>
> On Feb 23, 2017, at 16:49, Tom Barton <tbarton at hvc.rr.com 
> <mailto:tbarton at hvc.rr.com>> wrote:
>
> I've been reading bug reports and have not been able to determine if the
> "Failed to communicate with radio: Failed to read header." on a TX
> Modded radio has been fixed or not. Running Windows 7 and the latest
> chirp build.
>
> Any help or suggestions appreciated.
>
> Tom B.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com 
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com 
> <mailto:jardy72 at yahoo.com>
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com 
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom at tbarton at hvc.rr.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170223/daa0f726/attachment.html