[chirp_users] Chirp incorrectly defaults to Narrow band on 220 mhz amateur band.

[Jardy Dawson]

You are incorrect.  Ham bands are wide band, 25 hz width compared to 12.5 wide narrow band for public safety/business use.  We are not talking audio width, but frequency band width.

Jardy Dawson
WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

--------------------------------------------
On Mon, 2/6/17, Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net> wrote:

 Subject: Re: [chirp_users] Chirp incorrectly defaults to Narrow band on 220 mhz amateur band.
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Monday, February 6, 2017, 11:59 AM
 
 All VHF/UHF amateur
 frequencies SHOULD be narrow band. The repeaters are.
 
 
 > On 06
 February 2017 at 14:26 John Wilkerson <jl_wilkerson at att.net>
 wrote:
 > 
 > 
 > 1.25 M (220 Mhz) Amateur band incorrectly
 defaults to Narrow band. All
 > amateur
 frequencies are Wide band. Please correct.
 >
 _______________________________________________
 > chirp_users mailing list
 > chirp_users at intrepid.danplanet.com
 > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 > This message was sent to Nigel Gunn, W8IFF
 at nigel at ngunn.net
 > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to Jardy at jardy72 at yahoo.com
 To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com