[chirp_users] difference between FT-1802 and FT-1802M????

[Tom Hayward]

If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I
wrote it and I only had an FT-1802M to test it with. I can't tell you
if the FT-1802 is any different because I've never touched one. They
could be exactly the same.

What I would do to test it is manually enter a few memory channels in
the FT-1802. Then download into Chirp and make sure those channels are
where they're supposed to be (channel 1 is channel 1, etc.) and that
all the frequencies and tones are correct. If it all looks good then
there's probably no change to the memory layout between FT-1802 and
FT-1802M.

Tom KD7LXL

On Thu, Feb 2, 2017 at 6:00 PM, clowery at va.net <clowery at va.net> wrote:
> can not get chirp to read my FT-1802 is there a difference between it
> and a 1802M?
>
> NM4V
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KD7LXL at esarfl at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com