[chirp_users] Talkcoop kt-8900d

Jim Unroe rock.unroe at gmail.com
Thu Aug 17 13:07:12 PDT 2017


The data port of a KT8900D/KT7900D is on the back of the radio next to
the external speaker port. So it is easy to plug the programming cable
into the wrong port.

Also if the programming cable has a counterfeit Prolific USB-to-Serial
chip (most under $20 cables and those shipped "free" with a radio) and
is used with Windows, then you must roll the Prolific driver version
back to v3.2.0.0 (the latest drivers are designed to be incompatible
with unauthorized chip copies).

Jim


On Thu, Aug 17, 2017 at 11:26 AM, Tycen Stafford <tycen at tycen.com> wrote:
> Check to see if you have two ports on that radio. The dataport is in the
> front if so. There's some confusion with that radio, the first version came
> out with just one port on the back that was the dataport. Then a second
> version came out that had a port on the back for an external speaker and the
> port on the front was the dataport.
>
>
> # sent from my phone
>
> On Aug 17, 2017 7:56 AM, "gary brewer via chirp_users"
> <chirp_users at intrepid.danplanet.com> wrote:
>
> Hello k5geb. I have a talkcoop kt-8900 it is the same as the qyt kt-8900d i
> have tryed using chirp. And the software that comes with the radio i am
> unable to program it with chirp or there software all help to program this
> radio would be greatful .gary brewer k5geb
>



More information about the chirp_users mailing list