[chirp_users] Programming 2 distinct frequencies.

[Glenn At Home]

I would just delete the 600 kHz and the plus or minus, and then put in the 
two frequencies.
HTH.
Glenn
----- Original Message ----- 
From: "Paul Veltman" <stumpie1 at sbcglobal.net>
To: <chirp_users at intrepid.danplanet.com>
Sent: Saturday, August 05, 2017 9:08 PM
Subject: [chirp_users] Programming 2 distinct frequencies.


I noticed that when programming a repeater pair, Chirp defaults to a +
or - 600 kcs which is the standard ham practice.  I don't see where I
can deviate from that.  What I want to do specifically is program in
160.770 as the uplink and 160.230 as the downlink.

Paul WA6OKQ
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com