[chirp_users] Setting Frequency on TK-360

[John Kemker]

I was given a Kenwood TK-360 (4-channel model) at the last Stone Mountain
Hamfest.  Finally got a USB cable and hooked it up to my desktop machine
and downloaded the radio to CHIRP.  I get the following:

Location,Name,Frequency,Duplex,Offset,Tone,rToneFreq,cToneFreq,DtcsCode,
DtcsPolarity,Mode,TStep,Skip,Comment,URCALL,RPT1CALL,RPT2CALL
1,,441.900000,+,5.000000,TSQL,88.5,141.3,023,NN,FM,5.00,,,,,,
2,,444.625000,+,5.000000,TSQL,88.5,123.0,023,NN,FM,5.00,,,,,,
3,,443.100000,+,5.000000,Tone,100.0,88.5,023,NN,FM,5.00,,,,,,
4,,446.000000,,0.000000,TSQL,88.5,250.3,023,NN,FM,5.00,,,,,,

However, when I try to change the frequency of any of the memory channels
to the local (DeKalb County, GA) repeaters, I get the following error:

"Pasted memory 1 is not compatible with this radio because:
Frequency 440.700000 is out of supported range
Tx freq 445.700000 is out of supported range"

I get the same types of error for the other three frequencies, as well:
 442.200000, 444.250000, & 444.900000.

How can I override the "supported range" to update my radio?  I'm using
CHIRP daily-20170406, (GTK 2.24.30, PyGTK 2.24.0, Python 2.7.12) under
Linux Mint

OS: Linux Mint 18.1 Serena x86_64
Kernel: 4.4.0-21-generic
Shell: bash 4.3.46
Resolution: 1440x900, 1440x900
DE: Xfce
WM: Xfwm4
WM Theme: Mint-X
Theme: Mint-X [GTK2/3]
CPU: AMD FX-8120 (8) @ 3.1GHz
GPU: AMD Radeon HD 5000/6000/7350/8350 Series
Memory: 7628MiB / 8006MiB
Disk (/): 731G / 1.8T (43%)

Obviously, someone has programmed "unsupported" frequencies in this radio
already.


-- 
--John E Kemker III
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170407/a264b25c/attachment.html