[chirp_users] UV5R programming problems

[Chris Petry]

I used the instructions at miklor.com and made my own cable. Much cheaper
than store bought and it works every single time.

Chris KM4PUR

On Oct 29, 2016 10:46 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Sat, Oct 29, 2016 at 10:32 PM, Robert Baird via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
> > I am just starting out with my radio, I had this problem and I did not
> have
> > my radio in frequency mode.
> > Thank You Robert
> >
>
> When programming a UV-5R manually using the keypad, the radio must be
> in VFO (frequency) mode with the top (A) display line selected. It
> doesn't matter which mode the radio is in or which display line is
> selected when programming with a computer.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chris at chrispetry1971 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161030/84a633bc/attachment.html